Supply and maintenance of one Liquid Scintillation Counter for LMR

Overview

The European Commission, Directorate General Joint Research Centre (JRC), has published a public procurement to supply, install, commission, test, train and provide 48 months warranty/maintenance for one low background liquid scintillation counter for the Laboratory for Radioactivity Measurements (LMR) at the JRC Ispra site in Italy. The estimated maximum contract value is €250,000 and the contract may run up to 55 months; the award will be by open procedure to the lowest priced tender that fully complies with the administrative and mandatory technical requirements. Tenders must be submitted electronically via the Funding & Tenders Portal eSubmission system and bidders must be registered (EU Login, Participant Register PIC) and meet exclusion and selection criteria. The tender submission deadline is 14 December 2026 at 15:00 Europe/Rome and the public opening is scheduled for 14 December 2026 at 16:00 Europe/Rome.

Partner Search

Find collaboration partners for this call

Your Profile
👤
Your country

What You Offer

Describe your expertise here...

You Are Looking For

Describe what you seek here...

Sign In

Highlights

Tender at a glance

Essential facts

What it funds:procurement of one low‑level Liquid Scintillation Counter (LSC) for the JRC Ispra site laboratory for radioactivity measurements, including delivery, installation, on-site tests, training, documentation, certifications and 48 months warranty/maintenance (corrective and preventive) as specified in the technical specifications.

Estimated value:€250,000 total estimated procedure value. Contract period up to 55 months; supply + installation/tests/training within 7 months; 48 months warranty/maintenance 1.

  1. 1Who can apply: economic operators registered in the EU Participant Register with a PIC; joint tenders and subcontracting allowed; bidders must comply with exclusion and selection criteria in the procurement documents.
  2. 2How to apply: electronic submission only via the Funding & Tenders Portal eSubmission (EU Login required); tender language can be any official EU language.
Procurement bodyEuropean Commission, DG JRC - Joint Research Centre (JRC Ispra)
CPV / Main class38341000 - Apparatus for measuring radiation
Award methodLowest price
Place of performanceJRC Ispra, Via E. Fermi 2749, Ispra (VA), Italy
Submission methodElectronic via eSubmission (EU Login)
Estimated value€250,000
Warranty / Maintenance48 months (full-risk corrective maintenance)

Key deadlines and timings are in the contract notice and procurement documents; public opening is scheduled for 14/12/2026 at 16:00 (Europe/Rome) and the final receipt deadline for tenders is 14/12/2026 at 15:00 (Europe/Rome). Questions must be submitted by 03/12/2026 23:59 (Europe/Rome).

How awards will be evaluated:Award is based on lowest price among tenders meeting the technical and administrative requirements; ensure full compliance with the Tender Specifications, draft contract and annexes (safety, environmental, customs and site access rules).

Where to find documents and submit:procurement documents, draft contract, technical specifications and templates are available on the Funding & Tenders Portal tender page; submit tenders only via the Portal eSubmission link and retain required signed declarations (Declaration on Honour, DoH, annexes and financial offer form).

  1. 1Procurement reference: EC-JRC/IPR/2026/OP/5272 (TED ref 780140-2026)
  2. 2Portal entry and documents: Funding & Tenders Portal tender details page and eSubmission link provided in the notice

Footnotes

  1. 1Full technical, delivery, testing, training and warranty requirements are in the Tender Specifications (Part 2: Technical specifications) and draft contract available on the Funding & Tenders Portal.

Breakdown

Opportunity summary

Procurement (call for tenders) published by the European Commission - Joint Research Centre (JRC), Ispra site. Subject: supply, on-site installation, testing, documentation, training and 48 months warranty/maintenance of one low background Liquid Scintillation Counter (LSC) for the LMR (site laboratory for radioactivity measurements). Procedure: open procedure with electronic submission via the EU Funding & Tenders Portal eSubmission system. CPV main code 38341000 Apparatus for measuring radiation. Estimated total value: €250,000. Contract duration: maximum 55 months. Award criterion: lowest price. Place of performance and delivery: JRC Ispra site, Via Enrico Fermi 2749, Ispra (VA), Italy. Submission deadline: 14/12/2026 15:00 Europe/Rome. Public opening: 14/12/2026 16:00 Europe/Rome. Deadline for questions: 03/12/2026 23:59 Europe/Rome. Additional documents and tender package are published on the Funding & Tenders Portal F&T Portal - Tender page 1.

Procurement reference:EC-JRC/IPR/2026/OP/5272 (TED ref 218/2026, notice id 780140-2026).

Estimated total value:€250,000 (estimated overall contract amount; all lots combined).

Who can apply and how

Eligible applicants:any economic operator established and entitled to participate under EU Treaties and applicable international agreements (includes private companies, SMEs, large enterprises, research organisations, universities, public bodies and consortia). The tender documentation notes that participation is open to natural and legal persons from countries covered by the EU Treaties and by applicable procurement agreements (GPA signatories). Entities subject to EU restrictive measures are excluded. Registration requirements: participation requires an EU Login account and registration of the organisation in the Participant Register to obtain a PIC (Participant Identification Code). Joint tenders and subcontracting are permitted; joint tenderers must appoint a group leader and provide the Agreement/Power of attorney. Identified subcontractors whose share exceeds 20% or whose capacities are used for selection criteria must be named in the tender and provide commitment letters.

Submission method and language(s):Electronic submission only via eSubmission (Funding & Tenders Portal). Tenders may be submitted in any official EU language; system supports all 24 EU languages. Attachments must follow eSubmission system requirements (file size limits, file types, naming conventions).

Tender type, award and duration

Type:Open public procurement tender (direct contract resulting from the call). Nature of contract: supplies (direct supply contract). Award method: lowest price. Framework/renewal: contract concluded for an initial period of 7 months, renewable up to 4 times, total maximum duration 55 months. Execution includes delivery (DDP Ispra), installation, on-site tests, training, project documentation, certifications, and a 48‑month warranty including corrective maintenance with specified response/resolution times.

Essential dates and timelines

  1. 1TED publication / F&T Portal publication: 10/11/2026
  2. 2Deadline for additional information (questions): 03/12/2026 23:59 Europe/Rome
  3. 3Deadline for receipt of tenders (electronic): 14/12/2026 15:00 Europe/Rome
  4. 4Public opening of tenders (virtual): 14/12/2026 16:00 Europe/Rome
  5. 5Contract maximum duration: 55 months from entry into force
  6. 6Delivery & installation, on-site tests, training and documentation: within 7 months from contract entry into force
  7. 7Warranty period (including corrective maintenance): 48 months starting from date of signature of acceptance form

Technical scope and detailed requirements

The procurement covers one Liquid Scintillation Counter (LSC) with bench, acquisition/analysis software compatible with Windows 10, on-site assembly, commissioning tests, training for six personnel, provision of documentation and manuals, certified standards and consumables, and 48 months warranty including full-risk corrective maintenance. The Tender Specifications (Part 2) and Technical Specifications (5.1.0.x and §6) set mandatory minimum technical characteristics and tests.

  1. 1Instrument core and electronic requirements: Multi-Channel Analyzer (MCA) resolution at least 0.50 keV; electronic signal processing for filtering interfering radiation and reducing background count rates; temperature-controlled refrigeration.
  2. 2Shielding: active and passive shielding systems to achieve low background performance.
  3. 3Isotope and counting capabilities: discrimination of alpha and beta emitters; present DPM/CPM results for single, dual or triple-label beta or alpha emitting isotopes; minimum detectable activity (MDA) must be specified by the contractor.
  4. 4Energy ranges and efficiencies: contractor must specify alpha and beta energy ranges (minimum acceptable: beta 0–2,000 keV; alpha 0–10,000 keV); alpha counting efficiency at least 95%; beta counting efficiency at least 60% for 3H (0–18.6 keV) and 95% for 14C (0–156 keV). Tenderer must declare efficiency determination method, vial type and scintillation cocktail composition.
  5. 5Figure of merit: E^2/B parameter minimums: for 3H ROI 1–12.5 keV E^2/B >= 800; for 14C ROI 14.5–97.5 keV E^2/B >= 6000 using commercially available cocktails and vials.
  6. 6Automatic sample handling and identification: automatic sample changer capacity at least 40 x 20 mL vials; automatic sample identification (e.g. barcode reader); software allowing analysis of sample data while other spectra are acquired.
  7. 7Accessories and standards: suitable external standard source for quench monitoring (Contractor to describe), one set of calibrated standards (sealed and unquenched) for 14C and 3H and an unquenched blank for background determination.
  8. 8Physical and electrical constraints: maximum width and depth 125 x 125 cm; maximum weight 800 kg; electric power 220-240 V AC, peak power < 1 kW.
  9. 9Software and OS: latest acquisition and analysis software compatible with Windows 10 supplied; user manuals in English and/or Italian.
  10. 10On-site tests and acceptance: on-site assembly and tests performed under JRC supervision; contractor must provide on-site test certificates and demonstrate compliance with supplied performance data sheets.
  11. 11Training and documentation: onsite training for six JRC‑appointed staff with training attestations; operation and maintenance manuals and full project documentation; maintenance and spare parts procedures.
  12. 12Warranty and maintenance: 48 months warranty covering corrective maintenance including spare parts; response to JRC maintenance request within 1 week proposing intervention strategy; corrective maintenance to restore functionality within one month, else JRC may intervene and charge contractor.
  13. 13Safety, environmental and administrative requirements: compliance with applicable national and EU safety and environmental laws and JRC Ispra site rules; submission of Declaration on Honour and other administrative forms; customs and delivery procedures for introduction to JRC site; site access and personnel registration procedures.

Procurement documents and tender templates

All procurement documents are published on the Funding & Tenders Portal tender page for this procedure (see Annex list). Tenderers must consult and comply with all documents. The F&T Portal contains the Invitation to Tender, Draft Contract and Contract Part III, Tender Specifications (administrative and technical parts), Technical Specifications Rev2, Financial Offer Form (Annex 6, Excel), Declaration on Honour template, Financial Offer template, Acceptance Form template (Annex III), Draft contract annexes (safety clauses, environmental clauses, customs procedure, access procedures), and commitment/consent templates for subcontractors and relied-on entities.

  1. 1Invitation to tender (Annex: 1. Invitation to tender PDF)
  2. 2Tender specifications — Part 1 Administrative and Part 2 Technical (including Technical Specifications rev2)
  3. 3Draft contract and contract Part III
  4. 4Declaration on Honour template (DoH)
  5. 5Financial offer form (Excel) — Annex 6
  6. 6Acceptance Form template — Annex III
  7. 7Annex VI Safety contractual clauses (site safety rules and reporting)
  8. 8Annex VII Environmental contractual clauses
  9. 9Annex IV customs at JRC (Ispra) — procedure to introduce goods at the site
  10. 10Annex V — Rules relating to access and presence of external staff on the Ispra site
  11. 11Commitment letters and subcontractor templates (Annexes 4, 5.1, 5.2).

Eligibility, selection and award

Participation and selection rules follow the Financial Regulation and the tender specifications. Tenderers must submit a Declaration on Honour addressing exclusion and selection criteria. The tender evaluation follows an order: verificaion of access to procurement (restrictive measures), administrative compliance, exclusion checks (EDES), selection criteria (legal and regulatory capacity, economic/financial capacity and technical/professional capacity), and evaluation of the financial offers. Award is to the lowest priced compliant tender. Selection criteria include an average yearly turnover minimum (example in tender: €80,000 over last two years) and technical evidence of at least one similar supply in last three years plus technician CVs. Certain evidences may be requested only from the presumed successful tenderer.

  1. 1Exclusion criteria: grounds under Article 138 of the Financial Regulation; DoH required
  2. 2Selection criteria: legal and regulatory capacity, economic/financial capacity (example turnover threshold), technical/professional capacity (experience delivering similar supplies and qualified technician CVs).
  3. 3Award criterion: Price (100%) — lowest price compliant with minimum technical requirements.

Administrative and contractual conditions

Key contractual points summarised from the draft contract and special conditions:delivery DDP Ispra; formal acceptance via signed Acceptance Form following successful delivery, installation, tests and training; warranty and maintenance obligations during 48 months; performance and conformity certificates; invoicing and VAT rules (EU institutions VAT exemption statements to include on invoices where applicable); contract governed by Community and Union law, with Italian law as complement and courts of Varese as jurisdiction for disputes; contracting authority may perform checks and audits, and invoke EDES for exclusion matters.

Contracting authorityEuropean Commission, Joint Research Centre (DG JRC), JRC.J - Ispra Site Management, Nuclear Decommissioning and Waste Management (Unit J.1)
Place of performance / deliveryJRC Ispra site, Via E. Fermi 2749, Ispra (VA), Italy
Estimated value€250,000 (excluding VAT)
Award methodLowest price (price must cover all requirements)
Submission methodElectronic submission via eSubmission (F&T Portal)
Main CPV38341000 - Apparatus for measuring radiation

Practical requirements and site conditions

Access to the JRC Ispra site requires prior registration and issuance of site badges. At least 20 days before work start the contractor must provide staff lists, photos and criminal record certificates where required. Deliveries must follow customs procedures at the JRC customs gate; documentation (invoices, DDT/CMR, DAU EX1 where applicable) must be provided. Safety and environmental contractual clauses are integral to the contract and must be respected. Work hours are normally Monday to Friday and certain activities may require prior authorisation. Any special tools provided for maintenance must be handed to JRC after completion.

Administrative templates and tender structure (how to prepare a compliant submission)

Tenders must be structured and uploaded in eSubmission following the Annex 1 list of documents. At a minimum the submission must include: technical tender with evidence of compliance with technical specifications, financial tender using the provided Financial Offer form (Annex 6), Declaration on Honour (Annex 2), evidence of legal status/PIC in Participant Register, evidence for selection criteria when requested (turnover statements, bank letters or P&L, CVs for installation technician), list of identified subcontractors where applicable, commitment letters from subcontractors or entities whose capacities are relied upon, and any other mandatory administrative forms. Technical documentation must be in English (official language of procurement documents) and supporting documents may be in other EU languages where acceptable.

  1. 1Package 1 - Administrative documentation: signed Declaration on Honour (Annex 2), evidence of authorisation to sign, agreement/power of attorney for joint tenders (Annex 3), PIC registration evidence.
  2. 2Package 2 - Technical tender: compliance statement, technical data sheets, detailed proposal addressing each requirement in Technical Specifications rev2 (5.1 and §6), installation plan, on-site test plan, training plan, manuals availability.
  3. 3Package 3 - Financial tender: completed Financial Offer form (Annex 6 Excel) with detailed cost breakdown (supply, training, yearly warranty/maintenance for 4 years), total price in euros and the total amount field in eSubmission must match uploaded file.
  4. 4Package 4 - Selection evidence: turnover evidence, list of similar supplies, CV(s) for installation technician(s), commitment letters for identified subcontractors (Annex 5.1) or relied-on entities (Annex 5.2) where applicable.

Eligibility, consortium and geographic scope

Eligible applicant types:economic operators of EU Member States and countries covered by the EU’s procurement access rules (including GPA parties). This includes private companies, SMEs, large enterprises, research institutes, universities and public bodies. Consortium requirement: consortium (joint tender) is allowed but not mandatory; a single tenderer may submit. Beneficiary geographic scope: EU Member States; participation open per EU Treaties and GPA, subject to national rules on access to procurement and restrictive measures.

Mentioned countries / locations:Italy (Ispra, Varese) is the explicit place of performance and delivery. Participation is open to entities covered by the EU Treaties and the Government Procurement Agreement; documentation published on EU Funding & Tenders Portal applies EU-wide 1.

Contract stage, funding type and nature of support

Funding type:public procurement (direct supply contract) — the contracting authority will pay the supplier for the supply and services. Nature of support: monetary payment in exchange for supplies and services; this is a commercial procurement (not grant). Project stage: procurement for acquisition, installation and operation (deployment, commissioning and guarantee/warranty period). The activity is intended to deliver a fully operative laboratory instrument and related services.

Application process and evaluation stages

Application type:Open call / public tender. Submission is electronic only through eSubmission. Evaluation stages (typical progression): 1) administrative compliance and eligibility checks; 2) exclusion and selection checks (including DoH and EDES verification; request for evidence as needed); 3) technical compliance verification against mandatory minimum technical specifications; 4) financial evaluation and ranking by lowest price; 5) notification of outcome and contract signature. Public virtual opening is scheduled and announces tenderers and tender total prices.

Number of application stages:4 stages (administrative/eligibility, exclusion/selection, technical compliance, financial evaluation/award).

Success rates and co-funding

Success rates:not published. As a competitive public procurement the success rate equals number of contracts awarded divided by number of valid tenders submitted; this varies by procurement. Co-funding requirement: none. This is a purchase financed by the contracting authority; bidders do not need to provide co-funding.

Contract value, payments and invoicing

Estimated overall contract amount:€250,000. Payments follow contractual invoicing rules and VAT exemption advice for EU institutions. Interim payments and final balance arrangements are defined in the draft contract and special conditions (e.g. payments upon acceptance and yearly acceptance for warranty services). Invoices should be submitted electronically per the Portal or as instructed in the contract; include required VAT exemption statements depending on taxation place. Banking details to be set in contract. Payment terms: contracting authority must approve submitted documents and pay within 30 days unless suspension applies; interest on late payment applies as per contract conditions.

Risks, compliance and contractual obligations

Key contractual obligations and risks for bidders include:strict compliance with technical minimum requirements (non-compliant tenders will be rejected), acceptance of contract special conditions (draft contract annexes include safety, environmental and site access clauses), meeting warranty and maintenance SLAs (response within 1 week, resolution within 1 month), compliance with site security and customs import procedures, personnel vetting and site access rules, and fulfilment of exclusion/selection evidences when requested. Liquidated damages, price reductions, contract suspension or termination provisions apply for delays, non-conformity or breaches.

Key tender contacts and publication links

Lead contracting authority:European Commission, DG JRC - Joint Research Centre (JRC), Directorate J - Ispra Site Management, Nuclear Decommissioning and Waste Management, Unit J.1. Procurement contact email: jrc-ispra-dir-j-procurement@ec.europa.eu. Tender documentation and Q&A are available on the Funding & Tenders Portal tender page for this procurement Funding & Tenders Portal - tender details 1.

Complete lists of mandatory tender documents (per Annex 1)

  1. 1Declaration on Honour on exclusion and selection criteria (Annex 2)
  2. 2Evidence that signatory can sign on behalf of the organisation
  3. 3Agreement/Power of attorney for joint tenders (Annex 3)
  4. 4List of identified subcontractors (Annex 4) where applicable
  5. 5Commitment letters from identified subcontractors (Annex 5.1) and from entities on whose capacities tenderer relies (Annex 5.2) where applicable
  6. 6Legal existence and registration evidence (PIC and Participant Register)
  7. 7Technical tender addressing each requirement in Technical Specifications (Part 2)
  8. 8Financial tender using the Financial Offer form (Annex 6) with price breakdown and totals
  9. 9CV(s) of installation/maintenance technician(s) fulfilling selection criteria
  10. 10Any certificates, CE declarations, calibration/certification evidence for components and on-site test certificates.

Summary: What is this opportunity about and how to approach it

This is a procurement by the European Commission JRC (Ispra) to acquire, install, commission and maintain a low background Liquid Scintillation Counter for the site laboratory for radioactivity measurements (LMR). The contracting authority requires a ready-to-operate instrument plus software, consumables/standards, on-site testing and training, and a 48-month warranty with corrective maintenance service guarantees. The procurement is an open procedure evaluated on lowest price provided the technical minimums and mandatory conditions are met. Interested suppliers must register on the EU Participant Register (obtain a PIC), prepare an electronic tender submission via the F&T Portal eSubmission system, follow the document templates and mandatory forms published in the tender dossier, provide required selection evidence and technical compliance documentation, and submit by the stated deadline. The bid must cover supply, delivery, installation, documented testing and acceptance, training for 6 staff, certificates/manuals and four years of warranty/maintenance services with the stated SLAs. Site-specific rules such as site access, safety, environmental clauses and customs procedures are contractually binding and must be respected during delivery and performance. The tender package includes the Invitation to Tender, Tender specifications (administrative and technical), Financial Offer form, Draft contract and contractual annexes (Safety, Environment, Customs, Site access). Subscribe to the F&T Portal tender page and consult the procurement documents in full to prepare a compliant tender 1.

Footnotes

  1. 1Tender documentation and downloads including Invitation to tender, Tender specifications part 1 and part 2 (technical), Technical Specifications rev2, Draft contract and annexes, Financial offer form, Declaration on Honour and other templates are available on the Funding & Tenders Portal tender page for EC-JRC/IPR/2026/OP/5272: ec.europa.eu

Short Summary

Impact

Provide a fully operational low‑background liquid scintillation counter at JRC Ispra to restore and enhance accredited alpha/beta radioactivity measurement capacity for the Laboratory for Radioactivity Measurements.

Applicant

A manufacturer or specialised distributor able to deliver a turnkey solution including supply, transport, installation, on‑site commissioning, training and credible four‑year full‑risk maintenance with qualified service technicians.

Developments

Supply, installation, commissioning, acceptance testing, staff training and 48 months of corrective maintenance for a low‑background liquid scintillation counter meeting strict alpha/beta performance specifications.

Applicant Type

Profit organisations (SMEs/startups with manufacturing/service capability and larger specialised corporations) able to provide equipment, local installation support and multi‑year maintenance.

Consortium

Single applicants are acceptable; joint tenders (consortia) and subcontracting are permitted but not required, with joint tenderers assuming joint and several liability.

Funding Amount

Estimated maximum contract value:€250,000.

Countries

Place of performance is Italy (JRC Ispra); participation is open to economic operators from EU Member States and countries covered by EU procurement agreements (e.g., GPA signatories).

Industry

Scientific instrumentation / laboratory radiation measurement (nuclear decommissioning and waste management context).

Additional Web Data

Supply and maintenance of one Liquid Scintillation Counter for LMR

Executive summary

This is a public procurement opportunity, not a grant. The European Commission, Directorate General Joint Research Centre, intends to purchase, install, test, maintain and provide training for one low background liquid scintillation counter for the Laboratory for Radioactivity Measurements at the JRC Ispra site in Italy. The contract is awarded through an open procedure to the compliant tender offering the lowest total price.

The maximum estimated contract value is €250,000. The tender deadline is 14 December 2026 at 15:00 Europe/Rome time. Tenders must be submitted electronically through the European Commission Funding and Tenders Portal eSubmission system. The official opportunity notice and procurement documents are available at Official tender notice.

Opportunity profile

ItemDetails
Opportunity typePublic procurement tender, open procedure
Contracting authorityEuropean Commission, Directorate General Joint Research Centre
JRC locationVia Enrico Fermi 2749, I-21027 Ispra, Varese, Italy
Procedure identifierEC-JRC/IPR/2026/OP/5272
TED reference218/2026, notice 780140-2026
Contract natureSupplies, including associated installation, testing, training, warranty and maintenance
Main CPV38341000, apparatus for measuring radiation
Number of lotsOne lot, not divided into lots
Framework agreementNo
Estimated maximum value€250,000
Award methodLowest price, with price weighted at 100 percent
Maximum contract duration55 months
Submission methodElectronic eSubmission only
Tender languageAny official language of the European Union, although the procurement documents are published in English
Place of performanceJRC Ispra site, Italy
SME suitabilityThe notice indicates that the procurement is not specifically suitable for SMEs
Official publication date10 November 2026

What is being purchased

The procurement covers one low level background liquid scintillation counter and its appropriate bench for radioactivity measurements. The supply is broader than delivery of equipment and includes packaging, transport, installation, assembly, commissioning, on-site testing, documentation, training, warranty and full-risk maintenance.

The equipment is intended to support the LMR laboratory, which operates under ISO/IEC 17025 requirements and performs accredited radioactivity measurement methods. The procurement is linked to the JRC project identified in the technical specifications as I-10.01.03, NDU laboratory equipment.

Minimum technical requirements

The proposed system must meet all mandatory requirements in the technical specifications. Tenders that depart from minimum requirements, contain reservations or fail to cover the full scope may be rejected without further evaluation.

  • Multi-channel analyser with resolution of at least 0.50 keV.
  • Temperature-controlled refrigeration system.
  • Active and passive shielding systems.
  • Electronic signal processing to filter interfering radiation and reduce background count rates.
  • Capability to provide disintegrations per minute and counts per minute results for single, dual or triple label beta or alpha emitting isotopes.
  • Selectable counting time.
  • Discrimination between alpha and beta emitters and optimisation for total alpha and beta counting.
  • Minimum energy range of 0 to 2,000 keV for beta emissions and 0 to 10,000 keV for alpha emissions.
  • Alpha counting efficiency of at least 95 percent. The tender must state the efficiency, energy or channel range, vial type and scintillation cocktail used.
  • Beta counting efficiency of at least 60 percent for tritium and 95 percent for carbon 14, with the relevant measurement parameters stated in the tender.
  • Figure of merit of at least 800 for tritium in the specified region of interest and at least 6,000 for carbon 14 in the specified region of interest.
  • Automatic sample identification system, such as a barcode reader.
  • Maximum width and depth of 125 centimetres by 125 centimetres and maximum weight of 800 kilograms.
  • Electrical supply of 220 to 240 volts AC with maximum peak absorption below 1 kilowatt.
  • External standard source for quench monitoring, with its characteristics described in the tender.
  • Automatic sample changer with capacity for at least 40 vials of 20 millilitres.
  • Software allowing sample analysis and setting during acquisition of other sample spectra.
  • One set of calibrated standards and unquenched samples for carbon 14 and tritium, together with one unquenched blank standard for background determination.
  • Software and accessories compatible with Windows 10, as specified in the technical documents.

Required services and deliverables

  • Manufacture and supply of the liquid scintillation counter and all required components.
  • Packaging and delivery to the JRC Ispra site. Delivery requires two weeks advance notice and prior written permission from JRC Ispra.
  • Assembly and installation of all components.
  • On-site functional and performance tests under the supervision of JRC personnel or an appointed agent.
  • On-site test certificates demonstrating compliance with the equipment performance data sheets.
  • Training for six JRC-selected personnel after successful completion of the on-site tests.
  • Training attestations for the six trained personnel.
  • Operation and maintenance manuals in English, Italian or both languages.
  • Relevant conformity certificates, including the CE certificate.
  • Transfer of special tools required for assembly, maintenance and dismantling after successful testing.
  • Warranty and corrective maintenance covering interventions and spare parts required to restore functionality, except where the failure is caused by misuse by JRC.
  • Documentation after each maintenance intervention describing the work, replaced parts and confirmation of correct operation.

Contract duration and timetable

MilestoneRequirement
Initial contract periodSeven months
RenewalsFour possible renewals
Maximum overall duration55 months
Equipment deliveryWithin six months from the date the contract enters into force
On-site worksTests, training and delivery of relevant documentation within one month from delivery of all components
Warranty period48 months from signature of the acceptance form
Warranty responseIntervention strategy to be proposed within one week of a JRC request
Warranty restoration targetCorrect functionality to be restored within one month of the JRC request
Contractor responsibilityThe contractor remains responsible for the supply until acceptance by JRC Ispra

Who can apply

Any interested economic operator may submit a tender as a sole tenderer or as a joint tender with other economic operators. Eligible participants may be natural persons, legal persons, groups of economic operators and, where the applicable procurement access rules allow it, international organisations and entities established in eligible third countries.

Entities established outside the European Union may participate where the relevant EU treaty, public procurement agreement or World Trade Organization Government Procurement Agreement rules provide access on the applicable conditions. Each tenderer must state its country of establishment and provide evidence normally accepted under the law of that country.

Participation is subject to the absence of EU restrictive measures, exclusion grounds and procurement access restrictions. The restriction applies to the tenderer, group members, subcontractors and other entities whose capacities are relied upon where applicable.

Joint tenders are permitted. All group members assume joint and several liability for the performance of the contract. The group must appoint a group leader and submit the required agreement or power of attorney. A participant cannot submit more than one tender for the lot in incompatible roles, such as both a sole tenderer and a member of another group.

Subcontracting is permitted. Subcontractors whose individual share is expected to exceed 20 percent, or on whose capacity the tenderer relies for selection criteria, must be identified and supported by the required commitment letter. The contractor remains fully liable for the performance of the whole contract.

Mandatory registration and submission conditions

  • Each participating organisation or natural person must be registered in the European Commission Participant Register and have a Participant Identification Code, known as a PIC.
  • Each tenderer must create or use an EU Login account for access to the Funding and Tenders Portal and eSubmission system.
  • The tender must be submitted exclusively through the electronic submission system. Email, postal submission and other delivery methods will be disregarded.
  • All involved organisations in a joint tender must have the required registration and identification details.
  • A tender received after the deadline will be rejected. The eSubmission timestamp and submission receipt provide evidence of timely receipt.
  • Only one tender per lot may be considered for a tenderer, unless the procurement documents expressly allow variants. Variants are not allowed for this procurement.
  • Tenderers are responsible for monitoring the portal for amendments, clarifications and new documents.
  • The tender may be withdrawn or replaced before the deadline, but a replacement tender must contain all required information and attachments again.
  • All tender preparation and submission costs are borne by the tenderer and are not reimbursed.

Exclusion and selection requirements

Tenderers must submit the prescribed declaration on honour concerning exclusion and selection criteria. The contracting authority may request documentary evidence from the presumed successful tenderer before award, and may request updated declarations or evidence from any tenderer during the procedure.

The principal exclusion areas include insolvency, non-payment of taxes or social security contributions, grave professional misconduct, fraud, corruption, criminal offences, money laundering, terrorist financing, trafficking, significant contractual deficiencies, irregularities, circumvention of legal obligations, obstruction of audits or investigations, conflicts of interest and prior involvement in preparing the procurement documents that distorted competition.

The selection criteria identified in the administrative specifications are as follows:

CriterionMinimum requirementEvidence or assessment
Legal and regulatory capacityCapacity to perform the contract and pursue the relevant professional activityProof of enrolment in a relevant trade or professional register
Economic and financial capacityAverage annual turnover above €80,000 for the last two closed financial yearsProfit and loss accounts for the relevant years for each concerned entity, or appropriate bank statements. The most recent year must have closed within the preceding 18 months
Technical and professional capacityAt least one similar supply completed during the three years preceding the tender deadlineList of similar supplies with delivery dates and supply details
Installation and support personnelAt least one trained technician with more than one year of experience with similar instrumentsCurriculum vitae showing exact experience dates, qualifications and technical skills. The technician must be able to provide basic and advanced training in English or Italian

The economic and financial and technical evidence may not need to be uploaded with the initial tender, but it must be prepared in advance because the contracting authority may request it within a short deadline. Failure to provide valid evidence when requested may lead to rejection.

Award and evaluation

The award criterion is price only. The total tender price must cover every requirement in the procurement documents, including equipment, delivery, installation, testing, training, documentation, warranty and maintenance. The lowest priced tender that satisfies all administrative, eligibility, selection, technical and legal requirements will be ranked first.

A tender exceeding the maximum budget may be rejected as unacceptable. An abnormally low tender may also be examined and rejected under the applicable EU Financial Regulation rules if the tenderer cannot adequately justify its price or ability to perform the contract.

There is no quality scoring to compensate for a higher price. Applicants should therefore focus on complete technical compliance, accurate costing of the 48 month warranty and maintenance obligations, delivery and installation logistics, and prevention of administrative omissions.

Key deadlines and procedure dates

EventDate and time
TED publication10 November 2026
Latest date by which the authority is not bound to answer questions3 December 2026 at 23:59 Europe/Rome
Tender deadline14 December 2026 at 15:00 Europe/Rome
Public opening of tenders14 December 2026 at 16:00 Europe/Rome
Tender validity periodSix months, according to the procurement data

Questions must be submitted in writing through the Questions and answers section of the Funding and Tenders Portal. The contracting authority is not required to answer requests received less than six working days before the tender deadline. Applicants should submit technical and procedural questions well before the cut-off and monitor published answers and amendments.

Applicant preparation checklist

  1. 1Register the organisation in the Participant Register and obtain or verify the PIC.
  2. 2Create and test the EU Login account and eSubmission access well before the deadline.
  3. 3Review the invitation to tender, administrative specifications, technical specifications, financial offer form, declaration on honour, draft contract and all annexes.
  4. 4Confirm that the proposed instrument satisfies every mandatory technical threshold, including efficiency, figure of merit, energy range, sample capacity, dimensions, weight and electrical requirements.
  5. 5Prepare a complete technical tender mapping each requirement to a specific offered feature, supporting document or manufacturer datasheet.
  6. 6Price the entire lifecycle obligation, including transport, installation, site testing, training, manuals, conformity certificates, consumables, spare parts and 48 months of full-risk maintenance.
  7. 7Identify the installation and training technician and prepare a curriculum vitae showing more than one year of experience with similar instruments and ability to work in English or Italian.
  8. 8Compile evidence of at least one similar supply completed during the required three-year reference period.
  9. 9Prepare financial accounts or bank evidence supporting average annual turnover above €80,000.
  10. 10Complete and sign the declaration on honour for all entities for which it is required.
  11. 11Declare all relevant subcontractors and obtain commitment letters where required.
  12. 12Check country of establishment, access to EU procurement, restrictive measures and potential exclusion grounds for all involved entities.
  13. 13Submit through eSubmission early enough to obtain and retain the official submission receipt.
  14. 14Keep the tender valid for six months and ensure the named contact person monitors the registered email address.

Commercial and operational risks

  • The price-only award creates strong cost competition, while every mandatory technical requirement remains a pass or fail condition.
  • The 48 month full-risk warranty can generate substantial post-delivery costs. Spare parts, travel, labour, response times and corrective maintenance should be included in the tender price.
  • The delivery deadline of six months and the requirement to complete testing, training and documentation within one further month require confirmed manufacturing and installation capacity.
  • The equipment must be delivered only after written permission from JRC Ispra and with two weeks advance notice.
  • The contractor remains responsible for safe packaging, transport and the equipment until formal acceptance.
  • On-site personnel must comply with JRC Ispra access, safety, security, radiation protection and site regulations, as well as applicable Italian and European law.
  • The technical specifications refer to Italian legislation on occupational safety and radiation protection and to ISO/IEC 17025 laboratory competence requirements.
  • Failure to provide requested exclusion or selection evidence within the specified deadline may result in rejection even where the price is lowest.
  • The contracting authority may cancel the procedure before contract signature without compensating tenderers.
  • The tender becomes binding on the successful tenderer for the contract duration, subject to the procurement documents and signed contract.

Overall assessment

This opportunity is most suitable for manufacturers or specialised distributors of laboratory liquid scintillation counters that can provide a complete turnkey package and directly support installation, testing, training and long-term maintenance in Italy. A tenderer relying only on equipment resale without a qualified service technician, documented similar delivery experience and credible four-year warranty support is unlikely to meet the selection and performance requirements.

The opportunity is commercially relevant for suppliers with an established low background liquid scintillation counter product meeting the demanding alpha and beta performance criteria. Because the award is based entirely on lowest price, the strongest bid strategy is a fully compliant and carefully evidenced offer with transparent lifecycle costing and no optional features or variants that could create uncertainty about compliance.

The official portal notice identifies the contracting authority, procedure, value, deadline, duration and award method Official Funding and Tenders Portal record. The procurement document package includes the invitation to tender, administrative specifications, technical specifications, financial offer form, declaration on honour, draft contract and contract annexes Official procurement documents.

Update Log

No updates recorded yet.

Documents

Document file

Discover with AI

Let our intelligent agent help you find the perfect funding opportunities tailored to your needs.

Try AI Agent →

EU Grant Database

Explore European funding opportunities in our comprehensive, up-to-date collection.

Browse Database →

Stay Informed

Get notified when grants change, deadlines approach, or new opportunities match your interests.

Configure Notifications →

Track Your Favorites

Follow grants you're interested in and keep them organized in one place. Get updates on changes and deadlines.

Use the Follow button above ↑

Maintenance services for Applied Biosystems (Life Technologies) Scientific Instruments

TenderOpen

The European Commission Joint Research Centre (JRC) seeks a single contractor under a framework agreement to provide preventive and corrective maintenance, calibration, qualification, repair and technical support for Applied Biosystems /...

December 3rd, 2026

Durchführung von Strahlenschutzaufgaben in Rückbauprojekten

TenderOpen

The Joint Research Centre (European Commission) invites requests to participate in a restricted two-stage procurement to award a single framework agreement for radiation protection services at JRC Karlsruhe with a maximum ceiling of €600...

December 21st, 2026

mid-throughput next generation genome sequencer

TenderOpen

The European Commission Joint Research Centre (DG JRC) has published an open public procurement (procedure EC-JRC/GEE/2026/OP/5609) for the supply, installation, training, 24-month warranty and multi-year maintenance of a mid-throughput...

December 21st, 2026

Supply of an inert glovebox chain for the JRC Karlsruhe

TenderOpen

European Commission DG JRC (JRC Karlsruhe) is procuring the supply, delivery, installation, commissioning and warranty of an inert glovebox chain under procurement EC-JRC/KRU/2026/OP/6575 with an estimated total contract value of €650,00...

December 4th, 2026

Maintenance Services for Perkin Elmer Scientific Instruments

TenderOpen

The European Commission Joint Research Centre (JRC) in Ispra, Italy has published an open tender (EC-JRC/IPR/2026/OP/5527) for preventive and corrective maintenance, repairs, operational qualification and technical support for Perkin Elm...

December 17th, 2026

Durchführung von Aufbau und Änderung von Elektroinstallationen an Handschuhkästen, heißen Zellen, Labors und im Gebäude im JRC Karlsruhe

TenderOpen

The European Commission Joint Research Centre (JRC) Karlsruhe has published a public procurement for a single-supplier services framework agreement to carry out installation, modification and related electrical works on glove boxes, hot...

December 21st, 2026

IT-Sicherheitsberatung für das JRC Karlsruhe

TenderOpen

The European Commission Joint Research Centre (JRC) Karlsruhe invites requests to participate in a restricted two-stage procurement (EC-JRC/KRU/2026/RP/2931, TED 699278-2026) for IT security consultancy to revise and support implementati...

November 24th, 2026

Integration of the JT-60SA Actively Cooled Divertor

TenderOpen

Fusion for Energy has published a competitive procedure with negotiation (procedure identifier F4E-OPE-1405) for the integration, installation, inspection, testing support and supply of hardware for the JT-60SA actively cooled divertor,...

November 30th, 2026

On site support activities and supply of Test Coils

TenderOpen

Fusion for Energy (F4E) has published tender F4E OMF 2074 for on-site technical support for ITER magnets (preservation, preventive maintenance, cold testing and assembly) and the manufacture and supply of test coils. The procedure is a c...

November 30th, 2026

OHD/260934 Support to a point prevalence survey of healthcare-associated infections and antimicrobial use in long-term care facilities, including data validation and analysis

TenderOpen

European Centre for Disease Prevention and Control (ECDC) invites tenders for a single‑supplier framework service contract (Procedure ECDC/2026/OP/0030, Tender OHD/260934) to provide scientific, methodological, technical and project‑mana...

January 1st, 2027

Fourniture et installation de vestiaires métalliques

TenderOpen

Open EU tender (EP-INLO/LUX/2026/OP/0022) led by the European Parliament for a single-award framework agreement to supply and install metal lockers, shelving and related accessories for Brussels, Luxembourg and Strasbourg. Estimated tota...

November 25th, 2026

Fornitura di carni rosse, carni bianche, uova e suoi derivati e Fornitura di pesce fresco, congelato e conservato per la mensa e il Clubhouse (Prima fase del sistema d’acquisto dinamico)

TenderOpen

The European Commission's Joint Research Centre (JRC) in Ispra, Italy, has issued a call for tenders (OIB/IPR/2023/CEI/0002) for the procurement of food supply services. This procurement, categorized under a dynamic purchasing system, is...

January 12th, 2027