mid-throughput next generation genome sequencer

Overview

The European Commission Joint Research Centre (DG JRC) has published an open public procurement (procedure EC-JRC/GEE/2026/OP/5609) for the supply, installation, training, 24-month warranty and multi-year maintenance of a mid-throughput next-generation genome sequencer to be delivered to JRC-GEEL in Geel, Belgium. The contract is a direct supply and maintenance award with an estimated total value of €350,000, a maximum duration up to 75 months and evaluation on the best price-quality ratio weighted 60 percent quality and 40 percent price. Tenders must be submitted electronically via the EU Funding & Tenders Portal eSubmission system and comply fully with the mandatory technical specifications, selection criteria (minimum average turnover €110,000 and three similar projects) and exclusion rules. The deadline for receipt of tenders is 21 December 2026 at 16:00 Brussels time and the tender dossier and official documents are available on the Funding & Tenders Portal.

Partner Search

Find collaboration partners for this call

Your Profile
👤
Your country

What You Offer

Describe your expertise here...

You Are Looking For

Describe what you seek here...

Sign In

Highlights

What it funds

Summary

Supply, installation, on-site training, two-year warranty and multi-year preventive maintenance for a mid-throughput benchtop next-generation sequencer (sequencing-by-synthesis chemistry). Purpose: support independent scientific assessments of sequencing-based methods and prepare the regulatory and analytical framework for Regulation (EU) 2026/1388, including GMO/NGT detection, surveillance and method validation.

Estimated value:Total estimated procedure value €350,000 1.

  1. 1What it buys: supply, installation, IQ/OQ, training, 24-month warranty and at least four years of preventive maintenance and OQ visits.
  2. 2Who may apply: any economic operator (sole tenderer) or group of economic operators; subcontracting permitted subject to rules in tender documents.
  3. 3Award: open procedure, best price-quality ratio (quality 60% / price 40%).
Key deadline / milestoneDetails
Deadline for receipt of tenders21 December 2026, 16:00 Europe/Brussels
Public opening23 December 2026, 10:00 Europe/Brussels
Maximum contract duration75 months (includes supply, guarantee and maintenance phases)
Lead contracting authorityEuropean Commission, DG JRC - Joint Research Centre (JRC)

Eligibility highlights:participants must be registered in the Participant Register (PIC), meet exclusion and selection criteria (minimum average turnover > €110,000; proven experience: at least 3 similar supply and maintenance projects in the last 3 years), and comply with security, data protection and site-access rules for JRC-Geel. The tender is submitted electronically via the EU Funding & Tenders Portal; detailed administrative, technical and contractual documents (including IQ/OQ, technical specifications and maintenance report templates) are published with the call 1.

Footnotes

  1. 1Procurement record and full tender documents available on the Funding & Tenders Portal (tender ID EC-JRC/GEE/2026/OP/5609): Tender page.

Breakdown

High-level summary

The European Commission (DG JRC, Joint Research Centre, JRC.F – Health and Food, Food and Feed Compliance) has published an open procurement for the supply, installation, training, warranty and multi-year maintenance of a mid-throughput next generation genome sequencer to be delivered to JRC-GEEL (Geel, Belgium). The device will support independent scientific assessments of sequencing-based methods and the regulatory and analytical framework preparation for Regulation (EU) 2026/1388, supporting the EURL-GMFF and ENGL activities and pathogen/metagenomic surveillance. The procedure is an open eSubmission tender (TED ref 806089-2026). Estimated total value of the procurement is €350,000. The contract duration may be up to 75 months (initial phase + renewals). Submissions are electronic via the Funding & Tenders Portal and require a Participant Identification Code (PIC) / EU Login. The full procurement documents (invitation, draft contract, administrative and technical tender specifications and annexes) are published in English and contain mandatory templates and forms for tender submission Procurement page TED notice 1.

Procedure type and timelines:Procedure type: Open procedure (public tender). Submissions: electronic exclusive via eSubmission (EU Login). Deadline for receipt of tenders: 21/12/2026 16:00 Europe/Brussels. Public opening: 23/12/2026 10:00 Europe/Brussels. Contract notice / publication date: 19/11/2026. Questions cut-off for contracting authority replies: 11/12/2026 23:59 Europe/Brussels.

Detailed opportunity information (extracted from tender documents)

Objective:Acquire and maintain a benchtop mid-throughput next-generation sequencer (sequencing-by-synthesis reversible terminator chemistry) covering read lengths 50–300 bp, throughput up to ~350 Gb (150 bp metrics) and up to €2,000 millionreads or above depending on run configuration. Purpose: support detection, identification and characterisation of New Genomic Techniques (NGT) and NGS applications for EURL-GMFF, ENGL and pathogen/metagenomic surveillance and JRC internal use.

Estimated total procedure value:Estimated total value for the procurement: €350,000 (stated in the TED / procurement metadata).

Contract nature, duration and award method:Nature of contract: supplies (supply, installation, training, warranty and maintenance). Maximum contract duration: up to 75 months (structured as Phase 1: supply + installation + training + 24-month warranty/guarantee; Phase 2: preventive maintenance years after warranty; Phase 2 renewable up to three times for 12 months). Award method: Best price-quality ratio with quality weighted 60% and price 40%.

  1. 1Key technical minimums (mandatory): benchtop instrument, sequencing-by-synthesis reversible terminator chemistry, read length 50–300 bp, throughput up to ~350 Gb (150 bp metric), 5–2,000+ million reads per run, standard data formats (FASTQ, BAM, CRAM, VCF, BCL), base quality target 90% of reads ≥ Q30.
  2. 2Integrated computing and local data analysis capability required; cloud support optional but not compulsory if local secure analysis is possible; licences for hardware and software must be included.
  3. 3Delivery & installation within 3 months after contract entry into force; IQ/OQ certification and instrument calibration certificate at installation; English documentation and operation manual required.
  4. 4Training: on-site hands-on training (minimum one day focused on software to allow independent programming of protocols) provided in English by qualified trainer/application specialist.
  5. 5Warranty and maintenance: 24-month all-inclusive warranty starting at acceptance (certificate of conformity). Rapid on-site corrective maintenance response: telephone support within 3 hours, on-site intervention within 72 hours on working days. Preventive maintenance and OQ visits annually during warranty and for years 3–6 covered by contract (Phase 2). Maintenance reports required for each intervention (Annex IV model).
  6. 6Safety and compliance: CE marking, Safety Data Sheets for hazardous consumables, compliance with applicable EU regulations.
  7. 7Procurement packaging and delivery: DDP JRC-GEEL Central Store, Retieseweg 111, 2440 Geel, Belgium; deliveries must be inside standard JRC working hours and notified 10 days in advance.

Award / Quality evaluation detail:Award formula: Total score TS = TQ + P. Quality weighting 60%, Price weighting 40%. Quality scoring rubric includes: functional characteristics (paired-end and single-end capabilities; diverse application support including WGS, targeted amplicon and metagenomics) total 20 pts; reagents, shipping and storage conditions (room temperature vs frozen shipping and storage) total 30 pts. Minimum and maximum scores defined in tender specifications. See technical specifications for minimum compliance requirements.

Who can apply and how

This is a public procurement (open procedure). Any economic operator (natural or legal person), including SMEs, large enterprises, manufacturers, distributors, research organisations and public bodies that meet the rules on access to procurement may submit a tender. Participation is open to entities within the scope of the EU Treaties, international organisations, entities established in third countries that have procurement agreements with the EU and Agreement on Government Procurement signatories. Entities from third countries eligible under Horizon Europe rules may also participate. An entity must be registered in the Participant Register and have a PIC; eSubmission requires EU Login.

Structured extraction: categorisation questions and answers

The following structured fields extract eligibility, funding and process information from the procurement record and tender specifications.

Eligible Applicant TypesAny economic operator (natural or legal person). Examples explicitly covered and typical applicants: manufacturers of sequencing instruments, authorised distributors, SMEs, large enterprises, research institutes, universities, public laboratories, joint tenders (consortia). Subcontractors allowed and identified subcontractors must be declared. International organisations and entities from countries party to Government Procurement Agreement or with specific procurement agreements with the EU may participate.
Funding TypeProcurement / supplies contract (public tender). Nature of contract: supplies; includes supply, installation, training, warranty and maintenance services. Not a grant or subsidy.
Consortium RequirementNot required. Single tenderer allowed. Joint (group) tenders are permitted; if joint, a group leader must be appointed and joint and several liability applies. Subcontracting permitted; identified subcontractors must be listed in Annex 4 and provide commitment letters (Annex 5.1) if their individual share >20% or they are relied on for selection criteria.
Beneficiary Scope (Geographic Eligibility)Open to entities covered by the EU Treaties, including EU Member States and entities established in third countries with applicable procurement agreements. Also open to entities from third countries eligible under Horizon Europe rules or Agreement on Government Procurement signatories. Place of performance: JRC-GEEL, Geel, Belgium.
Target SectorScience and laboratory equipment: Biotechnology / Genomics / Next-Generation Sequencing (NGS). Target sectors: health, food and feed safety, genomics/NGS, pathogen surveillance, metagenomics, regulatory compliance for NGT/GMO.
Mentioned CountriesBelgium (place of performance JRC-GEEL). The procurement is by the European Commission (EU institution) and open to eligible countries as above.
Project StageProcurement of operational equipment: maturity required is deployment/operational readiness. Tender expects suppliers to deliver, install and qualify equipment (installation/operation qualification) and to provide training and maintenance — i.e., readiness for use and sustained operation (post-procurement warranty and maintenance).
Funding AmountEstimated total procedure value: €350,000 (stated in contract notice / TED record). The financial model Annex 6 requires tenderers to quote prices for Phase 1 (supply, installation, training, 24-month warranty) and Phase 2 (preventive maintenance per year).
Application TypeOpen call public tender. Electronic submission only (eSubmission via Funding & Tenders Portal) using EU Login / PIC. Fixed deadline (21/12/2026 16:00 Brussels time).
Nature of SupportMonetary procurement contract: the contracting authority will pay the contractor for the supplies and services (supply/install/train/ warranty/maintenance). Beneficiaries (contractor) receive payment; not a grant. The contracting authority receives the equipment and services.
Application StagesSingle formal procurement submission, evaluation and award. The administrative process includes: eligibility/exclusion checks, selection (capacity) checks, quality and financial evaluation, ranking and award. Practically: 1) eSubmission of tender; 2) administrative/selection checks; 3) quality & price evaluation; 4) award and contract signature. So 1–2 main procedural stages with internal verification steps. The tender specifications list required annexes and possible follow-up requests for documentary evidence from the presumed successful tenderer.
Success RatesNot published. As an open one-off public tender for a single supply lot, success rate depends on number of bidders; typical EU procurement competitive success rates can range from 5% to 25% for multi-bid situations. No explicit historical success rate is provided in the tender documents.
Co-funding RequirementNo co-funding requested from tenderer for the supply. Tender must quote full price in euros, excluding VAT. Financial offer to be free of duties, taxes and other charges (EU institutions are generally VAT-exempt). No matching funding is required; contract is a paid procurement.
TemplatesProcurement provides mandatory templates and annexes to be submitted with the tender. Key templates: Annex 1 List of documents (submission checklist), Annex 2 Declaration on Honour (exclusion & selection criteria), Annex 3 Power of Attorney / Agreement for joint tenders, Annex 4 List of identified subcontractors, Annex 5.1 Commitment letter by identified subcontractor, Annex 5.2 Commitment letter by entity on whose capacity the tenderer relies, Annex 6 Financial Offer Form. Tender specifications Part 2 = Technical Specifications must be fully addressed by the technical tender. IQ/OQ and maintenance report templates provided (Annex III and IV). The administrative specifications set precise upload locations and naming conventions for eSubmission. Full templates and models are included in the procurement document package for completion and upload.

Application and submission practicalities

Registration and identification:each entity must be registered in the Participant Register and have a PIC (Participant Identification Code). Personal and entity registration is mandatory. Tenders must be submitted exclusively via the Funding & Tenders Portal eSubmission application using EU Login credentials. Attachments: up to 200 files per submission, individual file size limits apply (system accepts files <50 MB for attachments). Supported browsers: latest Chrome or Firefox. eSubmission encrypts attachments upon upload and draft submissions can be edited until the deadline. The system will issue a submission receipt with official timestamp as proof of timely delivery. The contracting authority will not accept late submissions or other submission channels (email or paper).

  • Mandatory documents to upload with initial submission (Annex 1 lists exact placement in eSubmission): Declaration on Honour (Annex 2); Technical tender; Financial tender (Annex 6 form); Power of attorney if tender is joint (Annex 3); List of identified subcontractors (Annex 4) if applicable; Commitment letters from identified subcontractors or entities relied on (Annex 5.1 / 5.2) where applicable; Evidence of legal capacity and enrolment in trade register (may be requested by EU Validation Services).
  • Technical tender must address all minimum/mandatory technical requirements in Part 2 (Technical Specifications) including sequencing chemistry, read lengths, throughput, data formats, Q30 metrics, security/data locality, installation IQ/OQ, training program, and maintenance schedule.
  • Financial tender must use the provided Financial Offer Form (Annex 6) quoting amounts in euros excluding VAT. Prices quoted are fixed for Phase 1; Phase 2 price revision allowed per contract formula tied to HICP 'Euro area' index as stated.

Compliance, selection and award criteria (summary)

Exclusion checks:Declaration on Honour (Annex 2) required. Selection criteria (minimum capacity): economic/financial (average yearly turnover last two years > €110,000), technical/professional (at least 3 similar supply & maintenance projects completed in last 3 years). Award: best price-quality ratio with 60% quality and 40% price; quality sub-criteria as defined in Section 3.3.2 of administrative specifications and mandatory technical minimums in the Technical Specifications must be met (non-compliant tenders will be rejected).

Contracts, guarantees and post-award obligations

Contract:a direct supplier contract will be concluded with the (group leader in case of joint tender). The draft supply and maintenance contract and contract annexes (maintenance report, certificate of conformity, instructions for staff, holidays calendar, contract conditions) are published with the tender documents and shall govern the contractual relationship. The contract requires IQ/OQ at installation, certificate of conformity signed by contracting authority upon acceptance, maintenance reports for each visit, adherence to security requirements and site-specific safety rules for on-site staff. Performance guarantees and retention money guarantees are not required in this procurement (as per special conditions). The contracting authority may offset outstanding EU debts against payments under the contract in line with Financial Regulation. The contract includes rights for checks and audits up to five years after payment of the balance; EU anti-fraud rules and EDES checks apply.

  1. 1Warranty: 24 months all-inclusive warranty starting after acceptance (certificate of conformity).
  2. 2Response times: telephone support within 3 hours; on-site intervention within 72 hours on working days during warranty; preventive maintenance visits scheduled annually (minimum once per year) and additional qualification visits as specified.
  3. 3Maintenance reporting: signed maintenance report for each intervention (Annex IV model).
  4. 4Safety and security obligations: contractors and personnel must follow JRC-GEEL site-specific instructions (Appendix 2, Annex VI) including access procedure, background screening where needed, ethics reminder, and H&S provisions.

Templates and application form structure (guidance)

The procurement package contains explicit templates and required annexes which must be used or strictly followed. Key templates and their expected placement in eSubmission: Declaration on Honour (Annex 2) uploaded under 'Identification tenderer' attachments; Agreement/Power of Attorney (Annex 3) for joint tenders in the group leader section; List of identified subcontractors (Annex 4); Commitment letters (Annex 5.1 and 5.2) where relying on other entities; Financial Offer Form (Annex 6) uploaded under 'Tender Data – Financial tender'; Technical tender uploaded as 'Technical tender' under 'Tender Data'. The Administrative Specs Annex 1 provides an exact mapping of which entity uploads which document and where in eSubmission. Tenderers must use the Financial Offer Form and provide the breakdown requested (Phase 1 supply/installation/training/warranty and Phase 2 per-year preventive maintenance). IQ/OQ and maintenance documentation models (Annex III and Annex IV) are provided for acceptance and maintenance reporting.

Template / AnnexPurpose and required submission
Annex 1 List of documentsChecklist mapping each required upload location in eSubmission; follow it exactly.
Annex 2 Declaration on HonourMandatory exclusion and selection declaration; upload with tender (Identification attachments).
Annex 3 Power of attorney / AgreementMandatory for joint tenders / group leader appointment; upload under group leader section.
Annex 4 List of identified subcontractorsList subcontractors whose share >20% or on whose capacities tender relies; upload with tender.
Annex 5.1 Commitment letter by identified subcontractorSigned commitment from subcontractor to perform tasks if selected; include with tender where subcontractors are identified.
Annex 5.2 Commitment letter by entity on whose capacity is being reliedSigned commitment from entity on whose capacities tender relies (non-subcontractor) if used for selection criteria.
Annex 6 Financial Offer Form (Excel)Mandatory pricing form to be completed in euros and uploaded under Financial tender; includes Phase 1 and Phase 2 breakdowns; use this file - do not substitute.
Annex III Certificate of Conformity (draft)Used by contracting authority to attest supplies meet contract at acceptance; supplier must provide deliverables to obtain this certificate.
Annex IV Maintenance Report (model)Model report to be completed and signed after each maintenance visit; contractor must produce one per intervention.

Risks, special notes and compliance

Tenderers must ensure full compliance with the minimum requirements in the Technical Specifications; any variant offered will be disregarded. Data protection: tenderers must indicate locations of data processing/storage if outside EU/EEA and comply with Regulation (EU) 2018/1725 and Regulation (EU) 2016/679 where applicable. Security: contractor personnel may require background screening/security advice (Belgian process) for access to JRC-GEEL premises; contractor bears all screening costs. Environmental, equal opportunities and fraud prevention clauses apply per contract. Subcontracting and reliance on capacities are allowed under described conditions; identified subcontractors must provide commitment letters and be approved if changes occur after submission.

How we would explain this opportunity in one paragraph

This is a single-lot EU procurement by the JRC for a benchtop mid-throughput next-generation sequencing system plus installation, training, 24-month warranty and multi-year maintenance. The instrument will be used by the JRC’s Nucleic Acids Analysis laboratory (JRC-GEEL) to support GMO/NGT regulatory work, network support to national labs, and pathogen/metagenomic surveillance. Bidders must submit an electronic tender via the Funding & Tenders Portal using the provided mandatory templates (technical tender addressing detailed technical specs, and the Annex 6 financial form), meet selection criteria (financial and technical experience), comply with exclusion rules and security/safety site requirements, and accept the draft contract and service obligations. Evaluation is on best price-quality ratio (60% quality, 40% price).

Footnotes

  1. 1Procurement source and documents are published on the European Commission Funding & Tenders Portal and TED. Full tender dossier (Invitation to tender, Draft Contract, Tender Specifications Part 1 and Part 2, Annexes 1–6, Q&A and supporting documents) is available at the official call page Call details and the TED notice TED.

Short Summary

Impact

Provide the JRC with a fully operational mid-throughput next-generation sequencer and multi‑year maintenance to enable independent scientific assessment of sequencing-based methods and preparation/implementation of the regulatory and analytical framework for Regulation (EU) 2026/1388.

Applicant

An applicant capable of supplying, installing and qualifying benchtop NGS equipment and integrated computing/software, delivering on-site training, meeting strict warranty and rapid on-site maintenance SLAs, and demonstrating prior similar project experience and financial stability.

Developments

Procurement and sustained operation of mid-throughput sequencing infrastructure to support applications including whole genome sequencing, targeted/amplicon sequencing, metagenomics and NGT/GMO and pathogen surveillance workflows.

Applicant Type

Profit organisations (SMEs/startups and large corporations) and research organisations (researchers) or government organisations with commercial tendering capacity are the intended applicants.

Consortium

Not required — single economic operators may apply, although joint tenders/consortia and subcontracting are permitted under the tender rules.

Funding Amount

Estimated total procurement value is €350,000 (contracted procurement payments for supply, installation, training, 24‑month warranty and multi‑year maintenance).

Countries

Place of performance is JRC‑GEEL in Belgium, and participation is open to entities established in EU Member States and third countries covered by applicable EU procurement agreements or Horizon Europe access rules.

Industry

Targeted at the biotechnology/genomics sector (next‑generation sequencing) with policy focus on food & feed regulatory compliance (NGT/GMO) and pathogen/metagenomic surveillance.

Additional Web Data

Opportunity assessment

This opportunity is a public procurement tender rather than a grant. The European Commission, Directorate-General Joint Research Centre, is seeking to purchase and maintain a mid-throughput next generation genome sequencer to support independent scientific assessments of sequencing-based methods and preparation of the regulatory and analytical framework for Regulation (EU) 2026/1388. The authoritative tender record and procurement documents are available through the EU Funding and Tenders Portal Official tender record.

The procurement uses an open procedure and is implemented as a direct supply and maintenance contract. It is not divided into lots, variants are not permitted, and the successful tenderer will be expected to provide the complete solution in accordance with the administrative and technical specifications.

Key opportunity facts

Procedure identifier:EC-JRC/GEE/2026/OP/5609. TED reference: 225/2026, notice 806089-2026. Contracting authority: European Commission, DG JRC, Joint Research Centre. Contract nature: supplies, including associated maintenance obligations. Main CPV classification: 38434500, biochemical analysers. Estimated total contract value: €350,000. Maximum contract duration: 75 months. Award method: best price-quality ratio.

The current contract notice identifies 21 December 2026 at 16:00 Brussels time as the deadline for receipt of tenders. The public opening is scheduled for 23 December 2026 at 10:00 Brussels time. Requests for clarification submitted after 11 December 2026 at 23:59 Brussels time may not receive a reply. The metadata supplied with the opportunity contains an additional 1 January 2026 deadline, but this does not correspond to the detailed contract notice and should not be relied upon as the operative submission deadline.

The tender notice was published on 19 November 2026. Tenderers should monitor the official portal because the contracting authority may publish amendments, clarifications or replacement documents during the submission period.

Purpose and expected procurement

The procurement is intended to provide the JRC with sequencing infrastructure and related maintenance capability for scientific and regulatory work. The equipment is expected to support independent assessment of sequencing-based methods and contribute to analytical and regulatory preparation linked to Regulation (EU) 2026/1388.

The detailed performance requirements are contained in the technical specifications document. The tender must address all mandatory requirements and provide sufficient information for assessment against the technical and quality criteria. A tender containing deviations, reservations, assumptions or conditions against mandatory requirements may be rejected without further evaluation.

The supply and services will be delivered at the European Commission Joint Research Centre, JRC-GEEL Central Store, Retieseweg 111, 2440 Geel, Belgium.

Contract model and duration

The procedure will result in a direct contract rather than a framework agreement or dynamic purchasing system. The contract is planned for an initial period of 36 months and may be renewed three times, subject to the draft contract and the overall maximum duration of 75 months.

The contractor will remain responsible for complying with the procurement documents, maintenance obligations, security requirements, environmental considerations, equal opportunities obligations, fraud prevention requirements, confidentiality provisions and applicable data protection, labour, social and environmental law.

The contracting authority may use electronic exchanges during contract implementation. The contractor must comply with applicable security requirements, and any financial burden arising from security measures such as background checks or clearances is to be borne by the contractor.

Who can apply

Any interested economic operator may submit a tender as a sole tenderer or as a joint tender submitted by a group of economic operators. Tenderers may be natural or legal persons and are not required to adopt a specific legal form before submitting a tender.

Participation is open to persons established in EU Member States, international organisations and third countries covered by an applicable EU public procurement agreement, including countries covered by the World Trade Organization Government Procurement Agreement where the relevant conditions apply. Participation is also open to eligible third-country entities under the Horizon Europe access rules, subject to the conditions set out in the tender specifications.

Each tenderer must identify its country of establishment and provide supporting evidence normally accepted under the law of that country. All involved entities and subcontractors must comply with the applicable EU restrictive measures and access-to-procurement rules.

Applicants must register in the European Commission Participant Register and obtain a nine digit Participant Identification Code. Each member of a joint tender must use its own PIC. The tenderer must keep its organisational, legal and SME information up to date in the Participant Register.

Joint tenders and subcontracting

A joint tender may be submitted by a group with or without a separate legal personality. The group must appoint a group leader as the single point of contact. All group members assume joint and several liability for performance of the contract and must sign the required power of attorney or group agreement.

Subcontracting is permitted. The contractor remains fully liable to the contracting authority for the complete performance of the contract. Subcontractors whose individual share is known to exceed 20 percent, subcontractors whose capacities are used to meet selection criteria, and other subcontractors required by the specifications must be identified in the tender and provide the required commitment letter.

A tenderer may rely on the capacities of other entities to meet selection criteria, but it must demonstrate that the relevant resources will be available. For technical and professional capacity, the entity relied upon must perform the tasks for which that capacity is required. The contracting authority may require an entity relied upon for economic and financial capacity to sign the contract or provide a joint and several first call financial guarantee.

A person or entity cannot participate simultaneously as a sole tenderer and as a member of another group, or as a member of more than one group, in the same procedure. Cross-subcontracting arrangements between competing tenderers are also restricted and can lead to rejection.

Mandatory eligibility and selection requirements

Tenderers must demonstrate legal and regulatory capacity to perform the contract and must provide proof of enrolment in an appropriate trade or professional register when requested.

The minimum economic and financial capacity is an average annual turnover above €110,000 over the last two closed financial years. The requirement is assessed on a consolidated basis for the tenderer and relevant involved entities. Evidence may include profit and loss accounts and balance sheets for the last two years, or appropriate bank statements. The most recent financial year must have closed within the previous 18 months.

The minimum technical and professional capacity is experience in the supply and maintenance of similar instruments. Tenderers must demonstrate at least three similar projects, comparable in scope and complexity, completed during the three years preceding the tender deadline. Evidence must describe the project dates, total value, scope, role and amount invoiced. For ongoing projects, only the part completed during the reference period is considered.

The tenderer and all involved entities must be free from professional conflicts of interest that could negatively affect contract performance. The contracting authority may reject a tender where a conflict undermines the required professional capacity or quality of performance.

Exclusion and integrity requirements

Each involved entity must submit the required Declaration on Honour concerning exclusion and selection criteria. The declaration covers insolvency, tax and social security compliance, grave professional misconduct, fraud, corruption, criminal organisations, money laundering, terrorism, trafficking, irregularities, significant deficiencies in previous EU-funded contracts, circumvention of legal obligations and obstruction of investigations or audits.

The declaration also covers persons with powers of representation, decision-making or control, beneficial owners and persons assuming unlimited liability where relevant. Tenderers must declare that they and relevant involved entities are not subject to applicable EU restrictive measures and that the tender has been prepared independently and autonomously.

Supporting evidence may be requested from the presumed successful tenderer before award, or from any tenderer during the procedure where necessary. Tenderers should prepare judicial extracts, tax and social security certificates, financial statements, professional registration documents and project references in advance because the response period may be short.

Quality, price and award methodology

The contract will be awarded using the best price-quality ratio. Price represents 40 percent of the evaluation and quality represents 60 percent. The final score is calculated by adding the quality score and price score.

Quality is assessed through functional characteristics and reagent conditions. The published quality structure includes sequencing read types and application versatility, as well as reagent shipping and storage conditions.

Award criterion

Weight and assessment

Price

Price carries 40 percent. The evaluated price is the total price of the tender covering all requirements in the procurement documents.

Functional characteristics

Functional characteristics carry part of the quality score. The criteria award points for both paired-end and single-end reads, and for applications including whole genome sequencing, targeted sequencing, amplicon sequencing and metagenomics.

Reagents, shipping and storage

Reagent conditions carry part of the quality score. Points are available for shipping at room temperature, shipping frozen, storage at room temperature and storage frozen. The technical offer should clearly document the proposed conditions and any operational limitations.

The tender specifications indicate a maximum quality score of 60 points and a price weighting of 40 points. Where tenders achieve the same total score, the tender with the higher quality score ranks first, followed by the subsequent award criteria in descending order if further resolution is required.

Technical offer expectations

The technical tender must provide all information necessary to verify conformity with the technical specifications and evaluate the quality criteria. Tenderers should use a clear compliance matrix linking every mandatory requirement to a specific section, page or annex in the offer.

The offer should explain the sequencer configuration, throughput, read modes, supported applications, reagent requirements, shipping and storage conditions, installation, validation, training, maintenance, service response arrangements, warranty coverage, software and any consumables or accessories included in the price. Only features supported by the procurement documents and the proposed solution should be claimed.

Variants are not allowed. Tenderers should submit the specified model or solution in the form required by the technical specifications and should not introduce alternative configurations unless expressly permitted by the procurement documents.

Financial offer and taxes

The financial offer must use the official financial offer form and include a complete price breakdown. Prices must be stated in euros, including by tenderers established outside the euro area. Exchange rate adjustments are not permitted, and the tenderer bears the risk of exchange rate movements.

Prices must be quoted free of duties, taxes and other charges, including VAT, in accordance with the applicable privileges and immunities of the European Union institutions. Tenderers should confirm the correct national VAT treatment with their tax authorities where necessary.

The estimated total procurement value is €350,000. This is the contracting authority’s estimated value for the procurement and is not a grant amount, reimbursement rate or guaranteed payment to an applicant. Payment will depend on the prices offered, ordered or accepted supplies and services, and the contractual payment terms.

Submission process

Tenders must be submitted exclusively through the European Commission eSubmission system. Submissions by email, post or other channels will be disregarded. An EU Login account is required to access the electronic submission process.

The tenderer should complete the Participant Register registration, validate the relevant PIC, create the eSubmission application, upload all required documents and obtain the electronic submission receipt well before the deadline. The receipt timestamp is the evidence of submission time.

The tender may be withdrawn or replaced before the deadline, but a replacement tender must contain all required information and documents. A tender submitted after the deadline will be rejected, and the system will not permit late submission.

The tender may be submitted in any official language of the European Union. The procurement documents are published in English, and the English version is the authentic version for interpretation of the procedure.

Required submission documents

The submission package should be prepared using the forms and templates supplied with the procurement documents.

  • Technical tender demonstrating compliance with the technical specifications and addressing the quality award criteria
  • Complete financial offer using the official financial offer form
  • Declaration on Honour for the sole tenderer, or for each member and relevant involved entity in a joint tender
  • Evidence of authority to sign where required
  • Power of attorney or group agreement for a joint tender
  • List of identified subcontractors and the proportion of subcontracting
  • Commitment letter from each identified subcontractor
  • Commitment letter from each entity whose capacity is relied upon
  • Evidence of establishment and professional registration where requested
  • Supporting financial and project experience evidence prepared for possible request during evaluation

Documents requiring signatures should preferably use a qualified electronic signature compliant with the eIDAS Regulation. Handwritten signatures may be accepted in the circumstances described in the tender specifications, but original signed documents must be retained for the required record keeping period.

Evaluation sequence and risks

The contracting authority may assess access to procurement, administrative compliance, exclusion, selection, compliance with mandatory technical requirements, restrictive measures and award criteria in the order it considers appropriate. Failure at any stage can result in rejection without full evaluation of the remaining content.

Key risks for tenderers include late electronic submission, incomplete declarations, failure to meet the turnover or experience thresholds, unclear evidence of similar projects, non-compliant technical assumptions, incorrect use of subcontractors, conflicts of interest, missing signatures, unvalidated PIC information and failure to price all mandatory requirements.

The tender is binding for the stated validity period, which is six months. Tender preparation and submission costs, including any costs connected with attending the opening session, are borne by tenderers and are not reimbursed.

Commercial and strategic assessment

This tender is most relevant to genome sequencing instrument manufacturers, authorised distributors, laboratory equipment suppliers and specialist service providers with demonstrable experience supplying and maintaining comparable sequencing platforms. A consortium may be appropriate where one party provides the instrument and another provides local installation, maintenance, training or technical support.

The quality weighting of 60 percent is significant. A technically strong offer that clearly demonstrates supported read types, application breadth, reagent logistics and operational reliability may be more competitive than a lower priced offer with weaker technical evidence. The technical response should therefore be tailored directly to the scoring matrix rather than relying only on product brochures.

The three-project experience requirement and the 75-month maximum duration make after-sales service capacity important. Applicants should demonstrate continuity of support, availability of qualified engineers, spare parts and reagents, maintenance scheduling, incident response and operational support for the full contract period.

Recommended applicant action plan

  1. 1Confirm eligibility, country of establishment and absence of restrictive measures or exclusion grounds
  2. 2Register or update the organisation in the Participant Register and confirm the PIC
  3. 3Review the invitation letter, administrative specifications, technical specifications, draft contract and all annexes
  4. 4Map the proposed solution against every mandatory technical requirement
  5. 5Prepare evidence for at least three similar completed projects from the relevant three year period
  6. 6Prepare financial evidence demonstrating average annual turnover above €110,000
  7. 7Decide whether to bid as a sole tenderer, joint tender or tender with subcontractors
  8. 8Complete the Declaration on Honour and all relevant commitment and power of attorney forms
  9. 9Build the financial offer using the official template and price all supply, maintenance and associated obligations
  10. 10Submit through eSubmission early enough to test document compatibility and obtain the submission receipt
  11. 11Monitor the portal for amendments, clarifications and updated procurement documents until the deadline

Important dates and contacts

ItemInformation
Contract notice publication19 November 2026
Tender submission deadline21 December 2026 at 16:00 Brussels time
Latest stated date after which questions may not receive a reply11 December 2026 at 23:59 Brussels time
Public opening23 December 2026 at 10:00 Brussels time
Tender validity periodSix months
Contracting authorityEuropean Commission, DG JRC, Joint Research Centre
Performance locationJRC-GEEL Central Store, Retieseweg 111, 2440 Geel, Belgium
Estimated total value€350,000
Maximum duration75 months
Price quality weighting40 percent price and 60 percent quality

Overall conclusion

This is a focused supply and maintenance procurement for a genome sequencing platform rather than an EU funding scheme with grant rates. The opportunity is potentially suitable for established suppliers and structured consortia that can satisfy the mandatory capacity thresholds, provide a fully compliant mid-throughput sequencing solution, support the JRC in Geel for up to 75 months and compete on both technical quality and total price.

The principal bid priorities are strict compliance with the technical specifications, strong evidence of three comparable projects, sufficient financial capacity, complete eSubmission documentation and a technically detailed response to the 60 percent quality component. The 21 December 2026 deadline at 16:00 Brussels time should be treated as the operative deadline based on the detailed tender notice 1.

Footnotes

  1. 1Official tender record and procurement documents: EU Funding and Tenders Portal tender record.

Update Log

No updates recorded yet.

Documents

Document filePDF documentPDF documentPDF documentWord documentPDF documentWord documentWord documentWord documentWord documentWord document

Discover with AI

Let our intelligent agent help you find the perfect funding opportunities tailored to your needs.

Try AI Agent →

EU Grant Database

Explore European funding opportunities in our comprehensive, up-to-date collection.

Browse Database →

Stay Informed

Get notified when grants change, deadlines approach, or new opportunities match your interests.

Configure Notifications →

Track Your Favorites

Follow grants you're interested in and keep them organized in one place. Get updates on changes and deadlines.

Use the Follow button above ↑

Maintenance services for Applied Biosystems (Life Technologies) Scientific Instruments

TenderOpen

The European Commission Joint Research Centre (JRC) seeks a single contractor under a framework agreement to provide preventive and corrective maintenance, calibration, qualification, repair and technical support for Applied Biosystems /...

December 3rd, 2026

Maintenance Services for Perkin Elmer Scientific Instruments

TenderOpen

The European Commission Joint Research Centre (JRC) in Ispra, Italy has published an open tender (EC-JRC/IPR/2026/OP/5527) for preventive and corrective maintenance, repairs, operational qualification and technical support for Perkin Elm...

December 17th, 2026

Supply and maintenance of one Liquid Scintillation Counter for LMR

TenderOpen

The European Commission, Directorate General Joint Research Centre (JRC), has published a public procurement to supply, install, commission, test, train and provide 48 months warranty/maintenance for one low background liquid scintillati...

December 14th, 2026

Durchführung von Aufbau und Änderung von Elektroinstallationen an Handschuhkästen, heißen Zellen, Labors und im Gebäude im JRC Karlsruhe

TenderOpen

The European Commission Joint Research Centre (JRC) Karlsruhe has published a public procurement for a single-supplier services framework agreement to carry out installation, modification and related electrical works on glove boxes, hot...

December 21st, 2026

Durchführung von Strahlenschutzaufgaben in Rückbauprojekten

TenderOpen

The Joint Research Centre (European Commission) invites requests to participate in a restricted two-stage procurement to award a single framework agreement for radiation protection services at JRC Karlsruhe with a maximum ceiling of €600...

December 21st, 2026

Ship design and safety assessment of nuclear fission technologies for maritime applications

TenderOpen

European Maritime Safety Agency is procuring a 48 month framework contract to deliver technical studies on ship design, reactor integration, coupled multi‑physics simulations and safety assessments for maritime nuclear fission technologi...

December 7th, 2026

OHD/260934 Support to a point prevalence survey of healthcare-associated infections and antimicrobial use in long-term care facilities, including data validation and analysis

TenderOpen

European Centre for Disease Prevention and Control (ECDC) invites tenders for a single‑supplier framework service contract (Procedure ECDC/2026/OP/0030, Tender OHD/260934) to provide scientific, methodological, technical and project‑mana...

January 1st, 2027

IT-Sicherheitsberatung für das JRC Karlsruhe

TenderOpen

The European Commission Joint Research Centre (JRC) Karlsruhe invites requests to participate in a restricted two-stage procurement (EC-JRC/KRU/2026/RP/2931, TED 699278-2026) for IT security consultancy to revise and support implementati...

November 24th, 2026

Maintenance, update and further development of EFSA's Chemical Hazards Database OpenFoodTox 3.0.

TenderOpen

The European Food Safety Authority (EFSA) is seeking tenders for the maintenance, updating and further development of its Chemical Hazards Database OpenFoodTox 3.0, including IUCLID 6‑native data management, interoperability with OECD/OH...

December 10th, 2026

Provision of a comprehensive publishing service for EFSA’s scientific outputs

TenderOpen

EFSA seeks a single full-service publishing contractor to deliver end-to-end publishing for its scientific outputs (pre-submission checks, editorial and production services, JATS XML/JSON-LD generation, hosting on a modern open-access pl...

November 26th, 2026

Open call for tenders for the provision of Service Desk, Digital Workplace, other IT support services, and Stock Management for the Council of the European Union (SMARTSUP-II)

TenderOpen

The General Secretariat of the Council of the European Union has published an open call for tenders (CONSILIUM/2026/OP/0018) to establish a framework contract for Service Desk, Digital Workplace, other IT support and equipment life‑cycle...

December 10th, 2026

Multiple Framework Contracts in cascade for support services for expert groups and other stakeholders in the field of health and food 2027-2031

TenderOpen

Public procurement by the Health and Digital Executive Agency (HaDEA) for multiple framework contracts in cascade to provide operational, technical, logistical, communication and analytical support to EU expert groups and stakeholders in...

January 1st, 2027