Overview
Fusion for Energy (F4E) has published tender F4E OMF 2074 for on-site technical support for ITER magnets (preservation, preventive maintenance, cold testing and assembly) and the manufacture and supply of test coils. The procedure is a competitive procedure with negotiation, the contract is recorded as supplies (main CPV 31630000 Magnets), and the portal record indicates non-electronic submission with a stated deadline of 30 November 2026 (a differing 15 December 2026 date appears in an alternate listing and should be checked). No estimated total value or detailed technical requirements for the test coils are published in the summary, so interested bidders must obtain and follow the full procurement dossier, register on the F4E e‑procurement portal and confirm submission instructions, final deadline and specifications before preparing a bid.
Partner Search
Find collaboration partners for this call
What You Offer
Describe your expertise here...
You Are Looking For
Describe what you seek here...
Highlights
Tender F4E-OMF-2074 (Fusion for Energy)
One-line summary
Procurement to provide on-site support for ITER magnets (preservation, preventive maintenance, cold testing and assembly) and to manufacture test coils. Submission method: Non Electronic. Procedure type: Competitive procedure with negotiation.
Deadline:Tenders must be received by 30 November 2026, 16:00 (closing date/time). 1
- 1What is funded: on-site magnet support services and supply of test coils
- 2Who may apply: suppliers and contractors able to perform industrial magnet services and coil manufacturing (commercial entities)
- 3Procurement details: main CPV 31630000 Magnets; contract type Supplies; award via negotiated competitive procedure
| TED publication date | 09 November 2026 |
|---|---|
| Submission method | Non Electronic |
Estimated total value is not specified in the published notice. The contracting authority is Fusion for Energy (F4E). Interested suppliers should consult the official tender page for full documents and Q&A prior to submission.
Footnotes
- 1Official tender page: Tender record
Find a Consultant to Support You
Breakdown
Procurement at a glance
Title:On site support activities and supply of Test Coils. Procedure identifier: F4E-OMF-2074. Procuring entity: Fusion for Energy (F4E). Procedure type: Competitive procedure with negotiation. Contract type: Supplies. Main CPV: 31630000 - Magnets. Submission method: Non Electronic. Time limit for receipt of tenders: 30 November 2026, 16:00 (closing date/time). TED publication date: 09 November 2026. TED reference and portal details available from the buyer profile and official tender page F4E Tender Details. 1
Description of scope:The scope of the procurement comprises two principal streams: 1) provision of on-site activities related to ITER magnets including support to preservation, preventive maintenance, cold testing and assembly; 2) manufacturing and supply of test coils.
Eligible Applicant Types
The tender text does not enumerate a closed list of eligible applicant legal types. Based on the nature of the contract (supply of test coils and on-site technical services for a major European fusion project) eligible applicants are typically: industrial suppliers and manufacturers of magnet components and test coils; engineering and installation contractors; service providers with cryogenic, magnet testing and assembly experience; SMEs and large enterprises; research organisations or research institutes acting as contractors where they provide manufacturing or specialised onsite services; consortia or joint ventures combining manufacturing and site services capacity. Public bodies, NGOs and individuals are generally not the target unless specifically permitted in procurement documents. Final eligibility and admissibility criteria (such as financial capacity, technical capacity, exclusion and selection grounds) will be specified in the contract notice and procurement documents issued by F4E.
Funding Type
This is a public procurement contract awarded by a contracting authority. The primary financial mechanism is a supply/service contract awarded through competitive procurement. Successful bidders will receive contract payments for delivered supplies and services (monetary payments under a public contract).
Consortium Requirement
The procurement notice does not mandate a consortium structure in the scraped text. The procedure type (competitive procedure with negotiation) and technical scope (complex manufacturing and on-site technical services) indicate that bids may be submitted by single legal entities or by consortia/joint ventures if allowed by the procurement documents. Tender documentation should be checked for explicit provisions on consortium formation, lead contractor responsibilities, required subcontracting declarations and whether a consortium must appoint a single legal representative.
Beneficiary Scope (Geographic Eligibility)
The procurer is Fusion for Energy, an EU body supporting ITER activities. The tender notice as scraped does not list specific eligible countries. Typical F4E procurement rules allow bidders established in Member States of the European Union and may also permit entities from third countries subject to specific procurement rules and conditions in the tender documentation. Interested bidders should consult the buyer profile and contract documents for exhaustive geographic eligibility, nationality and origin rules.
Target Sector
Sector targeted:fusion energy infrastructure and magnet technologies. Thematic areas include magnet manufacturing and testing, cryogenic and superconducting magnet support, industrial manufacturing of coils, on-site assembly and preventive maintenance for large scientific infrastructure.
Mentioned Countries
No individual countries are explicitly listed in the scraped description. The contracting authority is Fusion for Energy, an EU body; the geographical context is ITER (international fusion project located in France) and European procurement, but the tender text provided does not explicitly enumerate participating or eligible countries.
Project Stage
Expected maturity:operational, demonstration and manufacturing stage. The activities requested are implementation and support: on-site preservation, preventive maintenance, cold testing and assembly (operational/installation and commissioning activities) plus manufacturing of test coils (industrial production for testing and validation).
Funding Amount
The scraped notice does not provide an estimated total contract value. The Estimated total value field is blank in the available text. Prospective bidders must consult the full procurement dossier and contract notice on the buyer profile to obtain any estimated value or contract lot breakdowns.
Application Type and Submission Method
Submission method:Non Electronic. The tender is open for submission until 30 November 2026, 16:00. The procurement uses a Competitive procedure with negotiation; interested parties must submit tenders following the non-electronic instructions in the procurement documents. The buyer’s official channels and any provided postal or hand-delivery address in the contract documents will specify the exact submission procedure, required copies and format.
Nature of Support
Successful applicants will enter into a supply/service contract and receive monetary remuneration for delivered goods and services under contractual payment terms. The opportunity offers contract-based commercial payments, not grants or subsidies.
Application Stages
The procurement procedure type, Competitive procedure with negotiation, normally involves at least these phases: 1) publication / call for tenders and submission (selection and receipt of tenders); 2) evaluation of tenders and negotiation(s) with one or more bidders; 3) award decision and contract signature. Therefore applicants should expect a minimum of 2 to 3 procedural stages: selection/admissibility, evaluation and negotiation, and final award.
Success Rates
No success rate data is provided in the procurement notice. Success rates for competitive public procurements vary widely depending on the number and quality of bids. For planning purposes bidders should assume strong competition given the technical scope and the prominence of ITER-related contracts.
Co-funding Requirement
There is no indication in the available text that co-funding is required from bidders. This is a commercial public contract where the contracting authority pays for services and supplies; co-funding is not typically required unless a specific financing or cost-sharing clause is included in the tender documents. Bidders should verify if any cost-sharing, advance payment guarantees or performance bonds are requested.
Templates and Application Structure
The scraped content references an '01 Tender e-Procurement Template' and shows typical procurement sections. Although the submission method is non-electronic, tenderers must follow the tender dossier structure provided by F4E. Expected documentation and structure (to be confirmed in full tender dossier) includes: administrative tender form(s) proving legal status and signatures; exclusion and selection questionnaires (financial and technical capacity); technical offer describing methodology for on-site activities (preservation, preventive maintenance, cold testing, assembly), manufacturing and quality control of test coils, staffing and resource plan, health and safety and environmental compliance; commercial/financial offer (price schedule, unit prices, payment terms); certificates and references demonstrating relevant experience (manufacture of coils, magnet testing, cryogenic and superconducting experience); guarantees, performance bonds or insurance certificates if requested; any requested declarations on subcontracting and consortium agreements. Tenderers should download and use the official templates and forms provided with the procurement documents and adhere to non-electronic submission format requirements.
Other procurement details and classification
Main CPV code:31630000 - Magnets. Additional CPV codes are not listed in the scraped content. The call is labelled 'Open For Submission' on the portal and the procurement reference appears in public tender listings on the buyer’s e-procurement platform and the EU Funding & Tenders Portal.
- 1Key actions required from bidders: prepare administrative documentation, prepare technical proposal covering on-site magnet activities and coil manufacturing, prepare commercial/price proposal, deliver non-electronic submission by the stated deadline.
- 2Critical checks for bidders: verify eligibility and nationality rules in the full tender dossier, confirm whether consortia are allowed and the required lead partner declarations, review required guarantees and insurance, confirm site access conditions for ITER facilities, verify quality assurance and traceability requirements for coils.
- 3Recommended prior experience: manufacture of magnet coils or test coils, superconducting magnet testing and cold testing, installation and assembly of large magnet systems, site maintenance and preservation of scientific infrastructure, quality control and traceability for critical components.
| Field | Detail |
|---|---|
| Opportunity title | On site support activities and supply of Test Coils |
| Procedure identifier | F4E-OMF-2074 |
| Procuring entity | Fusion for Energy (F4E) |
| Procedure type | Competitive procedure with negotiation |
| Contract type | Supplies (on-site services and manufacturing) |
| Main CPV | 31630000 - Magnets |
| Submission method | Non Electronic |
| Closing date/time | 30 November 2026, 16:00 |
| TED publication date | 09 November 2026 |
| Estimated total value | Not specified in scraped content |
This summary is based on the tender record as scraped from the EU Funding & Tenders Portal and associated buyer e-procurement pages. Prospective bidders must consult the full procurement dossier and the contracting authority’s buyer profile for complete eligibility rules, selection criteria, tender submission address and procedural documents prior to preparing and submitting a bid 1.
Footnotes
- 1Official tender page and procurement documents available from the EU Funding & Tenders Portal and the buyer e-procurement profile: ec.europa.eu and eu.eu-supply.com
Short Summary
Impact Deliver on‑site technical support and supply test coils to enable preservation, cold testing, assembly and reliable operation of ITER magnet systems. | Impact | Deliver on‑site technical support and supply test coils to enable preservation, cold testing, assembly and reliable operation of ITER magnet systems. |
Applicant Organisations with proven capability in manufacturing and quality control of magnet coils plus mobilisation of qualified personnel for on‑site cryogenic, electrical and mechanical support and testing. | Applicant | Organisations with proven capability in manufacturing and quality control of magnet coils plus mobilisation of qualified personnel for on‑site cryogenic, electrical and mechanical support and testing. |
Developments Manufacture of precision test coils and provision of preservation, preventive maintenance, cold testing and assembly services for large superconducting magnet infrastructure. | Developments | Manufacture of precision test coils and provision of preservation, preventive maintenance, cold testing and assembly services for large superconducting magnet infrastructure. |
Applicant Type profit SMEs/startups and large corporations with industrial magnet, cryogenic or precision manufacturing and on‑site services capabilities. | Applicant Type | profit SMEs/startups and large corporations with industrial magnet, cryogenic or precision manufacturing and on‑site services capabilities. |
Consortium Consortia are permitted but not mandated; single legal entities may also bid provided they meet the tender’s selection and technical requirements. | Consortium | Consortia are permitted but not mandated; single legal entities may also bid provided they meet the tender’s selection and technical requirements. |
Funding Amount Not specified in the published notice (contract value undefined). | Funding Amount | Not specified in the published notice (contract value undefined). |
Countries Spain is referenced in the tender listing and activities relate to ITER (France) under an EU contracting authority, so Spain and France are most relevant for delivery and site work. | Countries | Spain is referenced in the tender listing and activities relate to ITER (France) under an EU contracting authority, so Spain and France are most relevant for delivery and site work. |
Industry Fusion energy (ITER-related magnet manufacturing, testing and site support). | Industry | Fusion energy (ITER-related magnet manufacturing, testing and site support). |
Additional Web Data
On site support activities and supply of Test Coils
F4E OMF 2074 is a Fusion for Energy procurement for services and supplies supporting ITER magnet activities. It is not a grant or a funding scheme providing a fixed subsidy. The successful tenderer will be selected to perform a public contract for on site technical support and the manufacture of test coils.
The contracting authority is Fusion for Energy, the European Union organisation responsible for the EU contribution to ITER and related fusion research infrastructure. The procurement is associated with ITER magnet preservation, maintenance, cold testing and assembly activities.
Scope of the procurement
The published scope has two connected components:on site support activities on ITER magnets and the manufacture and supply of test coils. The on site element covers support for preservation, preventive maintenance, cold testing and assembly. The manufacturing element concerns test coils required for magnet related testing and associated technical activities.
The available notice does not provide sufficient technical detail to define the exact number, design, materials, performance parameters, inspection regime, testing protocol or delivery schedule for the test coils. Those matters should be treated as controlled requirements in the procurement documents and technical specifications rather than inferred from the summary notice.
Procurement profile
The procedure is identified as a competitive procedure with negotiation, also described in the F4E procurement information as a negotiated procedure with prior publication of a call for competition. This indicates that the contracting authority may negotiate aspects of tenders with eligible tenderers before selecting the final offer, subject to the procurement documents and applicable rules.
The contract type is recorded as supplies, although the scope also includes substantial on site support activities. Tenderers should therefore review the draft contract and technical specifications to determine the contractual treatment of labour, site services, manufactured items, acceptance testing, warranty, travel and other incidental costs.
The main CPV classification is 31630000, Magnets. No additional CPV codes are shown in the available metadata.
Key opportunity data
Reference information is summarised below.
| Item | Information |
|---|---|
| Contracting authority | Fusion for Energy |
| Tender reference | F4E OMF 2074 |
| Opportunity type | Call for tenders |
| Procedure | Competitive procedure with negotiation |
| Contract type | Supplies |
| Main CPV | 31630000, Magnets |
| Submission method shown on the EU Funding and Tenders Portal | Non electronic |
| Status shown in the available notice | Open for submission |
| Publication date | 9 November 2026 |
| Estimated total value | Not defined in the published summary |
| Geographical information shown in the tender listing | Spain |
| Primary subject | ITER magnet on site support and manufacture of test coils |
Deadline and submission route
The prepared opportunity metadata and the EU Funding and Tenders Portal summary state a tender deadline of 30 November 2026 at 16:00 UTC. This corresponds to 17:00 Central European Time when standard time applies. Applicants should follow the deadline and time zone stated in the current procurement documents and any corrigendum.
A discrepancy appears in the available public sources. The F4E open calls page lists the same tender with a deadline of 30 November 2026, while the associated Eu Supply ongoing tenders page shows a response deadline of 15 December 2026 at 16:00 CET. This conflict should be resolved by checking the live tender record, the latest corrigendum and the procurement documents before submission. The safer compliance approach is to prepare for the earlier 30 November deadline unless the contracting authority formally confirms the later date.1
The EU Funding and Tenders Portal record states that submission is non electronic. However, F4E guidance indicates that tenderers must register on the F4E e procurement portal at least 48 hours before the submission deadline and that procurement documents are accessed through that portal. The applicable tender instructions should be followed over any generic portal description, particularly concerning the permitted method for delivery of the tender, authentication, packaging, signatures and submission evidence.2
Who can apply
The available summary does not state a restricted applicant category, minimum turnover, mandatory nationality, consortium rule, subcontracting limit or specific technical classification. In a competitive procurement of this type, applications would normally be open to economic operators that satisfy the exclusion, selection, technical and professional requirements in the tender documents, whether acting individually or through an eligible consortium where consortium bidding is permitted.
Potential applicants are likely to include companies or consortia with demonstrated capabilities in superconducting or large magnet systems, fusion or cryogenic equipment, precision manufacturing, coil fabrication, industrial inspection, testing, maintenance and safe work on complex scientific infrastructure. These are practical indicators of likely competitiveness and are not confirmed eligibility conditions unless stated in the procurement documents.
Applicants should verify at minimum whether the tender permits joint bids, whether each consortium member must submit separate declarations, whether reliance on third party capacity is allowed, whether subcontractors require prior approval, and whether specific experience must be demonstrated by the lead tenderer or by the consortium as a whole.
Likely capability requirements
The published description indicates that a credible tenderer will need to demonstrate the ability to deliver both technical manufacturing and on site operational support. The following areas should be addressed in the tender if required by the specifications.
- Experience with large superconducting, resistive or otherwise technically complex magnet systems
- Manufacturing, assembly and quality control of coils or comparable precision electromechanical components
- Capability to support preservation, preventive maintenance, cold testing and assembly in an industrial or research facility
- Personnel qualified to work safely on high value magnet, cryogenic, vacuum, electrical and mechanical systems
- Documented quality assurance, configuration control, traceability and nonconformity management processes
- Capacity for inspection, dimensional verification, electrical testing, cold or cryogenic testing and delivery documentation where specified
- Ability to mobilise appropriately qualified personnel for on site work in Spain or another location stated in the tender documents
- Robust health, safety, environmental and security arrangements for work on ITER related infrastructure
- Financial and organisational capacity to manage a negotiated supply contract with potentially significant site coordination and manufacturing dependencies
Funding, value and payment considerations
No grant amount, co funding rate or reimbursement percentage is published for this opportunity. The value is recorded as not defined in the available F4E open calls listing. This means that applicants should not calculate an expected award from the notice summary and should obtain the financial schedules, bill of quantities, pricing model and draft contract from the procurement portal.3
Because this is a procurement, the successful supplier is expected to submit a commercial offer and receive payment under the resulting contract. The arrangement is therefore different from a Horizon Europe grant: costs are not reimbursed at a standard EU funding rate, and there is no stated percentage of eligible project costs financed by the EU in the published information.
The tender documents should be examined for pricing units, separate prices for manufactured items and on site labour, reimbursable travel, optional tasks, indexed prices, taxes, customs, insurance, performance guarantees, retention, milestone payments, acceptance criteria, liquidated damages and warranty obligations.
Duration and delivery requirements
The duration of the contract is not stated in the available summary. No start date, end date, framework duration, number of extensions, delivery milestones or option periods are identified. These details should be taken from the draft contract, technical specifications and pricing documents.
The scope suggests that performance may involve a combination of scheduled manufacturing and responsive or planned site support. Tenderers should assess their ability to maintain personnel availability over the full contract period, coordinate manufacturing lead times with ITER work packages, support testing and respond to site access and safety requirements.
Evaluation and award considerations
The published summary does not disclose the award criteria or weighting. The negotiated procedure means that technical compliance and commercial competitiveness are likely to be assessed through the tender and any subsequent negotiation, but the exact criteria must not be assumed.
Tenderers should be prepared to demonstrate technical conformity, relevant experience, personnel competence, quality management, delivery and mobilisation planning, risk management, safety performance and value for money. The final evaluation methodology, minimum scores, negotiation stages and permitted changes to tenders must be taken from the procurement documents.
Key compliance issues for applicants
- 1Use the exact tender reference F4E OMF 2074 in all correspondence and submission documents
- 2Register on the F4E e procurement portal sufficiently in advance, with at least 48 hours recommended by F4E guidance
- 3Download and review every available document, including the contract notice, instructions to tenderers, technical specifications, draft contract, pricing template, declarations and annexes
- 4Confirm the legally permitted submission channel because the EU Funding and Tenders Portal summary states non electronic submission while F4E directs tenderers to its e procurement portal for documents and tender participation
- 5Monitor questions and answers, clarifications and corrigenda until the deadline
- 6Resolve the conflicting deadline information and plan submission against the earlier date unless an official notice confirms an extension
- 7Check whether the bidder must hold specific insurance, certifications, security clearances, quality accreditations or site safety authorisations
- 8Provide evidence for financial capacity, technical capacity, comparable contracts, key experts, manufacturing resources and site mobilisation arrangements where requested
- 9Ensure that all forms, declarations, signatures, translations, consortium documents and subcontractor information comply with the tender instructions
- 10Retain proof of timely submission and verify that any required hard copy, electronic media or portal confirmation has been received
Recommended applicant approach
A strong bidder should build a compliance matrix mapping every requirement to a specific response, evidence document and responsible team member. The technical response should separate the manufacturing work package from the on site support work package while explaining how quality, configuration management, safety and scheduling will be integrated across both.
The bid should identify the proposed production facilities, equipment, inspection capability, qualified personnel, supply chain controls and contingency arrangements. It should also explain how the tenderer will manage interfaces with F4E, ITER organisations, site operators and other contractors.
Commercial assumptions should be explicit and consistent with the pricing template. Particular attention should be given to the cost of mobilisation, site access, travel, accommodation, specialist tools, testing, rework, storage, insurance and schedule changes. Unclear assumptions can create material delivery and margin risk in a negotiated technical procurement.
Risks and uncertainties
- The total contract value is not published in the available summary
- The contract duration and delivery milestones are not published in the available summary
- The award criteria and their weightings are not published in the available summary
- Detailed technical requirements for the test coils are not available in the prepared context
- Eligibility conditions, minimum turnover and experience thresholds are not confirmed
- The stated deadline conflicts with the deadline shown in the Eu Supply tender listing
- The submission method is described as non electronic in one portal record, while F4E directs tenderers to its e procurement portal for registration and access
Overall assessment
This is a specialist industrial procurement rather than a conventional EU funding opportunity. It is most relevant to established engineering, magnet, fusion, cryogenic, precision manufacturing and technical services organisations with the resources to combine factory production with qualified on site support.
The opportunity may be suitable for a consortium where one partner provides magnet or coil manufacturing and another provides ITER site services, testing, maintenance or specialised quality assurance. Any consortium strategy must be validated against the tender rules before commitments are made.
The principal immediate actions are to obtain the complete procurement package, register on the relevant F4E platform, verify the submission channel, confirm the final deadline, assess technical and financial capacity, and prepare questions through the authorised procurement communication route. The earlier 30 November 2026 deadline should be treated as the working deadline until an official correction is available.
Sources and verification notes
The analysis uses the official EU Funding and Tenders Portal record, the F4E open calls listing and the F4E associated public tender listing. The procurement documents remain controlling for eligibility, technical specifications, contract conditions, award criteria, value, duration and submission formalities.
Official tender record:EU Funding and Tenders Portal tender record
F4E open calls listing:F4E Open Calls
Associated tender listing:F4E public tenders
The available F4E listing identifies the opportunity as open, published on 9 November 2026, with a 30 November 2026 deadline and no defined value. The associated public tender listing identifies the same reference but shows a 15 December 2026 response deadline, creating a discrepancy that must be checked against the latest official notice or corrigendum.
F4E states that procurement documents are available through the e procurement portal and that tenderers should register at least 48 hours before the submission deadline. This does not by itself resolve the separate portal description of non electronic submission, so the tender instructions should be followed for the actual delivery method.
Footnotes
- 1The F4E open calls page shows 30 November 2026, while the associated Eu Supply listing shows 15 December 2026 at 16:00 CET. The latest corrigendum or tender instruction should be treated as decisive. Sources: F4E Open Calls and F4E public tenders .
- 2The F4E open calls page states that key procurement documents are accessible from the e procurement portal and recommends registration at least 48 hours before the submission deadline. Source: F4E Open Calls .
- 3The F4E open calls listing records the value for F4E OMF 2074 as not defined. Source: F4E Open Calls .
Update Log
No updates recorded yet.
Discover with AI
Let our intelligent agent help you find the perfect funding opportunities tailored to your needs.
EU Grant Database
Explore European funding opportunities in our comprehensive, up-to-date collection.
Stay Informed
Get notified when grants change, deadlines approach, or new opportunities match your interests.
Track Your Favorites
Follow grants you're interested in and keep them organized in one place. Get updates on changes and deadlines.
Integration of the JT-60SA Actively Cooled Divertor
Fusion for Energy has published a competitive procedure with negotiation (procedure identifier F4E-OPE-1405) for the integration, installation, inspection, testing support and supply of hardware for the JT-60SA actively cooled divertor,...
Quality Control Inspectors for ITER and Broader Approach and Roadmap Projects
Fusion for Energy (F4E) has published an open procurement (procedure F4E OMF 2050) for provision of technical quality control inspection services (CPV 71631000) including resident, itinerant and spot inspectors at contractors and subcont...
Maintenance services for Applied Biosystems (Life Technologies) Scientific Instruments
The European Commission Joint Research Centre (JRC) seeks a single contractor under a framework agreement to provide preventive and corrective maintenance, calibration, qualification, repair and technical support for Applied Biosystems /...
Maintenance Services for Perkin Elmer Scientific Instruments
The European Commission Joint Research Centre (JRC) in Ispra, Italy has published an open tender (EC-JRC/IPR/2026/OP/5527) for preventive and corrective maintenance, repairs, operational qualification and technical support for Perkin Elm...
Durchführung von Aufbau und Änderung von Elektroinstallationen an Handschuhkästen, heißen Zellen, Labors und im Gebäude im JRC Karlsruhe
The European Commission Joint Research Centre (JRC) Karlsruhe has published a public procurement for a single-supplier services framework agreement to carry out installation, modification and related electrical works on glove boxes, hot...
Fourniture de matériel « pre-owned » pour serveurs et stockage ainsi que fourniture de la maintenance
The Court of Justice of the European Union has issued an open tender (CURIA/2026/OP/0027, TED 806058-2026) for the supply of pre-owned, reconditioned or new server and storage equipment (Lot 1) and hardware maintenance for servers after...
Facilities and Corporate Support Services
The European Banking Authority, as lead contracting authority for EBA, ESMA and EUISS, publishes an open public procurement for facilities and corporate support services in Paris covering two lots (front desk/reception and security; corp...
AO 26 023 — Contrat cadre de Travaux de Techniques Spéciales dans les bâtiments du Parlement européen à Bruxelles
AO 26 023 is an open procurement for a framework contract to deliver special technical works and related services in the European Parliament buildings in Brussels, covering HVAC, plumbing and sanitary installations, electrical systems fo...
Supply of an inert glovebox chain for the JRC Karlsruhe
European Commission DG JRC (JRC Karlsruhe) is procuring the supply, delivery, installation, commissioning and warranty of an inert glovebox chain under procurement EC-JRC/KRU/2026/OP/6575 with an estimated total contract value of €650,00...
In-country support services – South Eastern Europe and Türkiye
The European Training Foundation (ETF) invites tenders for a framework contract (procedure ETF/2026/OP/0006) to provide in‑country operational, logistical, language, reimbursement and consultancy support across Albania, Bosnia and Herzeg...
Travaux GTC - GTB - Supervision
The European Parliament (DG INLO) has published an open tender (EP-INLO/SXB/2026/OP/0032) for works to supply, install, program, commission and supervise centralised technical management and building automation (GTC/GTB) systems in its S...
Supply and maintenance of one Liquid Scintillation Counter for LMR
The European Commission, Directorate General Joint Research Centre (JRC), has published a public procurement to supply, install, commission, test, train and provide 48 months warranty/maintenance for one low background liquid scintillati...