Overview
European Commission DG JRC (JRC Karlsruhe) is procuring the supply, delivery, installation, commissioning and warranty of an inert glovebox chain under procurement EC-JRC/KRU/2026/OP/6575 with an estimated total contract value of €650,000. The procedure is an accelerated open supply contract awarded on the basis of lowest price among tenders that fully comply with mandatory administrative, selection and technical requirements, and submissions must be made electronically via the EU Funding & Tenders Portal. The installation is for handling radionuclides including actinide-containing organometallic work and must comply with applicable German nuclear installation regulatory, safety and site-interface requirements. Tender deadline is 4 December 2026 at 12:00 Europe/Berlin and bidders must consult the official tender documents for full specifications, acceptance tests and contractual terms.
Partner Search
Find collaboration partners for this call
What You Offer
Describe your expertise here...
You Are Looking For
Describe what you seek here...
Highlights
What it funds / buys
Scope
Supply, delivery, installation, factory and site acceptance, training and 24-month warranty for a chain of four gloveboxes (three inert/one air), associated antechambers, gas purification/regeneration systems, sensors, filters and accessories for handling alpha-emitting radionuclides under controlled under-pressure conditions at JRC Karlsruhe. The installation must meet German nuclear regulatory and technical requirements.
Estimated contract value:€650,000 1
- 1Procedure: accelerated open procedure
- 2Award method: lowest price
- 3Contract duration: max 36 months (12 months delivery/installation + 24 months warranty)
Who can apply
Economic operators able to supply specialised laboratory glovebox systems and associated gas purification and safety equipment. Participation is open to natural and legal persons covered by the EU Treaties, international organisations and third country operators where allowed by applicable agreements (GPA, Euratom programme rules). Tenderers must register in the Participant Register (PIC) and submit electronically via EU Login / eSubmission.
Key dates and submission
| Event | Date / time (Europe/Berlin) |
|---|---|
| Deadline for receipt of tenders (electronic) | 04/12/2026 12:00 |
| Public opening (virtual) | 04/12/2026 14:00 |
| Deadline to submit questions to contracting authority | 30/11/2026 23:59 |
Tenders must be submitted electronically via the Funding & Tenders Portal eSubmission (EU Login required). See procurement documents on the Portal for technical specifications, draft contract, financial offer form and declaration on honour JRC tender page.
Evaluation & practical notes
Award is by lowest price among compliant tenders that meet mandatory technical, safety and selection criteria (including proven experience delivering equivalent installations, quality management and insurance). Supplier personnel must obtain required security and radiological clearances to work on-site; performance includes factory acceptance tests and two-month on-site acceptance period before warranty start.
Footnotes
- 1Estimated total procedure value and procurement documents published on the Funding & Tenders Portal Tender notice and documents.
Find a Consultant to Support You
Breakdown
Opportunity summary
Procurement (call identifier EC-JRC/KRU/2026/OP/6575) from the European Commission, DG JRC - Joint Research Centre (JRC Karlsruhe). The contracting authority intends to sign a direct contract for the supply, delivery, installation, factory acceptance, site acceptance and commissioning of a chain of four interconnected gloveboxes (three inert/argon recirculation units plus one air box) with associated gas purification, antechambers, instruments (sensors, fridge, freezer, cold wells), safety interlocks and documentation. The installation is for handling radionuclides (actinide-containing organometallic synthesis) in JRC Karlsruhe and must meet German nuclear installation legal and technical requirements. Estimated total procedure value: €650,000. Maximum contract duration: 36 months (12 months delivery and installation; 24 months warranty). Award method: lowest price. Procedure type: Accelerated open procedure. Submissions exclusively electronic via the EU Funding & Tenders Portal (eSubmission) using EU Login. Deadline for receipt of tenders: 04/12/2026 12:00 (Europe/Berlin). Public opening: 04/12/2026 14:00 (Europe/Berlin).
Primary procurement documents:Invitation to Tender (ITT), Administrative Annex (Tender specifications - part 1), Technical Specifications (Tender specifications - part 2), Draft contract, Declaration on Honour template, Financial offer form and related annexes are published on the Funding & Tenders Portal F&T Tender documents 1.
Eligibility and application logistics
Eligible applicants, submission method, languages, timeline and key formal rules for participation and award are defined in the procurement documents. Tenderers must be registered in the Participant Register and use their PIC to submit via eSubmission. Submissions in any official EU language are accepted; language of the procurement documents is English (English version is the sole authentic text).
- 1Submission method: Electronic only (eSubmission via EU Funding & Tenders Portal). EU Login account and Participant Identification Code (PIC) required.
- 2Deadline: 04/12/2026 12:00 Europe/Berlin (tenders received after the official timestamp are rejected).
- 3Questions / Q&A: must be submitted through the Portal Questions & answers. Contracting authority is not bound to reply to questions received after 30/11/2026 23:59 Europe/Berlin.
- 4Public opening: Virtual opening session; tenderers may request to attend (max two representatives per tender).
- 5File technical rules: eSubmission supports defined file types and attachment limits (check eSubmission System Requirements).
What the contracting authority is buying (technical scope)
Supply, delivery, installation, commissioning and acceptance testing of a complete inert glovebox workstation chain for research with alpha-emitting radionuclides (actinides). Main elements required by the Technical Specifications: four gloveboxes (GB1..GB4) interconnected via antechambers; three inert-class gloveboxes to ISO 10648-2 class 1 containment (target <0.05 vol.% ingress at ±10 mbar; capability to achieve and maintain <1 ppm O2 and moisture); one glovebox under air (class 2). Gas purification (redundant reactor trays with copper catalyst and molecular sieves), regenerative solvent absorbers for GB2/GB3, oxygen/moisture/VOC sensors, oil-bubble safety valves, HEPA filtration stages, interlock-controlled antechambers (DN150 and DN400 types, bag rings for containment), built-in fridge and freezer units (GB2/GB3), cold wells, laminated borosilicate viewing panels and chemical resistance coatings where specified, and control/interface with the JRC monitoring centre alarm signals. Tightness, factory acceptance testing and site acceptance tests are mandatory as described in the technical document.
Procurement and contractual features
This is a supplies contract awarded via an accelerated open procedure. The contract will be concluded as a direct contract (single supplier or joint tender group). Award criterion is lowest price subject to compliance with mandatory technical and administrative requirements. The contract contains liability, confidentiality, data protection and audit/check provisions consistent with EU procurement rules and the Financial Regulation. The contracting authority may require security clearances for contractor staff (nuclear reliability checks; additional security checks for non-EU nationals).
Key administrative and commercial terms
Estimated total procedure value:€650,000 (excluding VAT). Maximum contract duration: 36 months (12 months for delivery/installation plus 24 months warranty). Payment schedule in contract: 20% after design acceptance; 70% after factory acceptance; 10% after final technical acceptance. Incoterm DPU for delivery to JRC Karlsruhe (Hermann-von-Helmholtz-Platz 1, Building 811, 76344 Eggenstein-Leopoldshafen, Germany). Award to lowest price tender fulfilling all requirements. Tender validity: 6 months (as set in tender).
Security, safety and staff clearance:Contractor personnel staying beyond short-term access must undergo nuclear reliability checks under German AtZüV and may need additional Commission security checks for non-EU nationals; radiological protection passes (category A professional exposure) and suitability for respiratory protection (G26/2) may be required for staff working in controlled/contaminated areas.
Procurement documents and mandatory application attachments
Six documents are published with the tender package:(1) ITT (Invitation letter); (2) Administrative annex/tender specifications part 1; (3) Declaration on Honour template; (4) Technical Specifications (detailed part 2); (5) Draft contract; (6) Financial offer form (Excel). Bidders must follow the Annex 1 list of documents to be uploaded in eSubmission and ensure all required evidence for exclusion and selection criteria is included or available on short notice.
- 1Declaration on Honour on exclusion and selection criteria (Annex 2)
- 2Evidence of legal/regulatory capacity (proof of registration) where requested
- 3Evidence of economic and financial capacity (turnover, insurance) where applicable
- 4Evidence of technical and professional capacity (project references, quality management certificate)
- 5Financial offer form (Annex 6 Excel Financial model) completed and total amount filled in eSubmission
- 6Technical tender (technical descriptions, drawings, manufacturer data, factory acceptance plan, quality and welding certificates as required in Technical Specifications)
Answers to the classification questions (detailed extraction)
- 1Eligible Applicant Types: startups (if technically qualified), SMEs, large enterprises, universities, research institutes, non-profits and specialised manufacturers of laboratory/nuclear equipment, subcontractors and joint tender groups are allowed. Public bodies may participate if they meet access rules. Entities subject to EU restrictive measures cannot participate. A group (joint tender) is permitted and group members are jointly and severally liable.
- 2Funding Type: This is a public procurement (supply contract). The financial mechanism is contract procurement / supply contract (payment for goods and related services).
- 3Consortium Requirement: Either a single tenderer (sole tenderer) or a consortium / joint tender is allowed. A joint tender must appoint a group leader and submit an Agreement/Power of Attorney (Annex 3).
- 4Beneficiary Scope (Geographic Eligibility): Primarily EU-based entities and entities from countries covered by the EU Treaties and the applicable international procurement agreements (GPA). The call is open to third country entities where agreements allow; the procurement implements the Euratom Research & Training Programme and may accept third country participants eligible under that programme. Tenderers must confirm country of establishment for access checks.
- 5Target Sector: Nuclear science / nuclear safety and security; laboratory equipment (gloveboxes and gas purification), research infrastructure for actinide/alpha radionuclide handling; sectors: laboratory/precision equipment, nuclear/radiological protection equipment, industrial machinery.
- 6Mentioned Countries: Germany (JRC Karlsruhe location) explicitly mentioned. Geographic region: EU (European Commission contracting authority; EURATOM programme). The procurement references European norms and German regulatory requirements.
- 7Project Stage: Delivery / installation and commissioning of infrastructure (mature equipment procurement and installation). Expected project maturity: equipment supply, installation, validation, and operational commissioning (development → validation → demonstration → operational use).
- 8Funding Amount: Estimated total procedure value €650,000 (estimated overall contract amount).
- 9Application Type: Open call tender via electronic submission (accelerated open procedure). Electronic tender submission via eSubmission (EU Login) is mandatory.
- 10Nature of Support: Monetary contract payment to the supplier (commercial supply contract). This is not a grant; it is payment for supplies and services.
- 11Application Stages: Single-stage open tendering process (submission of full tender; evaluation; award) — effectively 1 formal submission stage with evaluation and award. Technical acceptance stages (design acceptance, factory acceptance, site acceptance, final acceptance) are contract milestones for payments but not separate application submission stages.
- 12Success Rates: Not provided in the procurement documents. As a competitive tender with award to lowest compliant price, success rate depends on number and quality of tenders received; the contracting authority does not publish success-rate statistics here.
- 13Co-funding Requirement: No co-funding is required. This is a procurement contract where the contracting authority pays the contractor; bidders must price the supply inclusive of required work (engineering, delivery, installation, testing).
- 14Templates: The procurement package includes templates and forms to be used: Invitation letter (ITT), Administrative Annex, Declaration on Honour (Annex 2), Agreement/Power of Attorney for joint tenders (Annex 3), List of identified subcontractors (Annex 4), Commitment letter templates for subcontractors (Annex 5.1) and for entities on whose capacity is relied (Annex 5.2), and Financial Offer Form (Annex 6 Excel). The Technical Specifications document (Tender specifications part 2) provides the mandatory technical requirements and acceptance test templates (design acceptance, factory acceptance, site acceptance). Tenderers must upload the Declaration on Honour and the required evidence in the eSubmission 'Parties' sections and upload technical and financial documents under 'Tender Data' as specified in Annex 1.
Technical and compliance highlights applicants must meet
Mandatory technical compliance is pass/fail. Key technical points bidders must explicitly demonstrate in their technical tender: ISO 10648-2 class 1 containment for inert boxes (target <0.05 vol.% ingress at ±10 mbar); capability to reach and hold <1 ppm oxygen and moisture under argon recirculation for 72 hours; negative pressure control with alarm and shutdown thresholds (working -3 to -5 mbar; alarm -8 mbar; shutdown -10 mbar); gas purifier and regeneration system design (copper catalyst + molecular sieve reactors), sensor specifications (O2, moisture, VOC), interlock logic for antechambers (DN150 and DN400), HEPA filtration (H13/H14 stages where required), oil-bubble safety valves, welded or sealed feedthroughs as specified, materials and welding standards (stainless steel 1.4404/316L, TIG welding, material certificates and welder qualifications), factory acceptance testing protocol and site acceptance protocol, documentation in English, and warranty terms (minimum 24 months).
- Mandatory factory acceptance tests and site acceptance tests (tightness, gas purity and stability, interlock testing).
- Design documentation delivery and approval prior to manufacture (welding plan, electrical plan, material certificates).
- Provision of training for JRC personnel and full documentation (operation, maintenance, schematics).
- Personnel security and radiation protection clearances for installation and commissioning staff.
How to apply: practical checklist
- 1Register organisation in Participant Register and obtain PIC (if not already registered).
- 2Subscribe to the call on the Funding & Tenders Portal to receive updates F&T Tender page.
- 3Prepare and complete Declaration on Honour (Annex 2) and other evidence of non-exclusion.
- 4Prepare selection evidence (financial, insurance, references, quality management certificate) as specified in Section 3.2 of the Administrative Annex.
- 5Complete the Financial Offer form (Annex 6 Excel) and enter the total tender amount in the eSubmission fields.
- 6Prepare the technical tender folder with detailed designs, QA/QC evidence, factory acceptance test plan, materials and welding certificates and proposed schedule.
- 7Submit the full tender package electronically via eSubmission before 04/12/2026 12:00 Europe/Berlin.
What this opportunity is about — executive summary
The European Commission's Joint Research Centre in Karlsruhe seeks a qualified supplier to procure and install an inert glovebox chain designed for high-purity inert atmosphere manipulation of actinide-containing organometallics and other alpha-emitting radionuclides. The procurement is a direct supplies contract, accelerated open procedure, awarded to the lowest price among technically compliant tenders. The technical brief is precise and mandatory: tight ISO-class containment, gas purification to <1 ppm O2 and moisture under argon, under-pressure safety control and interlocks, dedicated antechambers with vacuum/flushing cycles, HEPA filtration and safety valves, integrated sensors and alarm outputs to the JRC monitoring centre, refrigerated and frozen storage, solvent adsorption/regeneration for VOC control, full documentation, factory/site acceptance and a 24-month warranty. All tenders must be submitted electronically via the Funding & Tenders Portal by the stated deadline. Interested suppliers must review the ITT, the Administrative Annex and the Technical Specifications in full and follow the Annex 1 submission checklist when preparing the tender. This procurement is for delivery to the JRC Karlsruhe site in Germany and must comply with German nuclear installation regulatory and JRC safety requirements. For document access and submission use the F&T Portal location specified above F&T Tender documents 1.
| Key fact | Extracted detail |
|---|---|
| Procurement type | Supplies contract (accelerated open procedure) |
| Estimated value | €650,000 (estimated overall contract amount) |
| Contract duration | Max 36 months (12 months delivery/installation + 24 months warranty) |
| Award method | Lowest price (subject to compliance with technical/administrative requirements) |
| Submission method | Electronic only via eSubmission (EU Login required) |
| Deadline | 04/12/2026 12:00 Europe/Berlin |
| Public opening | 04/12/2026 14:00 Europe/Berlin |
| Contracting authority | European Commission, DG JRC - Joint Research Centre (JRC Karlsruhe) |
| Place of performance | JRC Karlsruhe site, Eggenstein-Leopoldshafen, Germany |
| Main CPV | 38000000 - Laboratory, optical and precision equipments (excl. glasses) |
Footnotes
- 1All procurement documents, annexes and the Financial Offer form are published in the Funding & Tenders Portal tender details page linked in the notice: ec.europa.eu
Short Summary
Impact Enable safe, compliant laboratory operations for handling alpha‑emitting radionuclides and the synthesis of actinide‑containing organometallic compounds under a high‑purity inert atmosphere. | Impact | Enable safe, compliant laboratory operations for handling alpha‑emitting radionuclides and the synthesis of actinide‑containing organometallic compounds under a high‑purity inert atmosphere. |
Applicant A supplier with proven capability to design, manufacture and integrate inert‑atmosphere glovebox systems, perform site installation and commissioning, and meet nuclear‑sector regulatory, safety, radiological protection and documentation requirements. | Applicant | A supplier with proven capability to design, manufacture and integrate inert‑atmosphere glovebox systems, perform site installation and commissioning, and meet nuclear‑sector regulatory, safety, radiological protection and documentation requirements. |
Developments Procurement, delivery, installation, factory and site acceptance testing, commissioning and warranty support for a connected inert glovebox chain with gas purification, containment controls and interlocks for radioactive‑materials research. | Developments | Procurement, delivery, installation, factory and site acceptance testing, commissioning and warranty support for a connected inert glovebox chain with gas purification, containment controls and interlocks for radioactive‑materials research. |
Applicant Type Profit SMEs/startups and large corporations specialising in laboratory/nuclear equipment manufacture, systems integration and engineering services. | Applicant Type | Profit SMEs/startups and large corporations specialising in laboratory/nuclear equipment manufacture, systems integration and engineering services. |
Consortium Permits either a single tenderer or a joint tender group/consortium (joint tenderers must follow the tender rules and assume joint and several liability where applicable). | Consortium | Permits either a single tenderer or a joint tender group/consortium (joint tenderers must follow the tender rules and assume joint and several liability where applicable). |
Funding Amount Estimated total contract value €650,000. | Funding Amount | Estimated total contract value €650,000. |
Countries Germany is the place of performance (JRC Karlsruhe) and applicants must be from EU or other countries eligible under applicable EU procurement/Euratom rules and able to comply with German nuclear regulations. | Countries | Germany is the place of performance (JRC Karlsruhe) and applicants must be from EU or other countries eligible under applicable EU procurement/Euratom rules and able to comply with German nuclear regulations. |
Industry Nuclear research infrastructure / laboratory equipment for radiological containment and high‑purity inert‑atmosphere processes. | Industry | Nuclear research infrastructure / laboratory equipment for radiological containment and high‑purity inert‑atmosphere processes. |
Additional Web Data
Supply of an inert glovebox chain for the JRC Karlsruhe
Executive Summary
This is a European Commission procurement opportunity, not a grant scheme. The Joint Research Centre Karlsruhe intends to purchase and install an inert glovebox chain operating under under-pressure for handling radionuclides and for synthesising actinide-containing organometallic compounds in very high purity atmospheric conditions. The installation must comply with regulatory, legal and technical requirements applicable to nuclear installations in Germany.
The estimated total contract value is €650,000. The procedure is an accelerated open procedure for a supply contract, with a maximum duration of 36 months. The stated award method is lowest price, subject to compliance with all exclusion, selection and technical requirements. The official opportunity record and tender documents are available through the EU Funding and Tenders Portal 1.
The principal commercial opportunity is therefore suited to specialist manufacturers, integrators and engineering companies with proven capability in inert-atmosphere gloveboxes, radioactive-material laboratory installations, nuclear-sector compliance, commissioning and associated safety documentation.
Opportunity Profile
| Field | Information |
|---|---|
| Opportunity title | Supply of an inert glovebox chain for the JRC Karlsruhe |
| Contracting authority | European Commission, Directorate-General Joint Research Centre |
| JRC location | Karlsruhe, Germany |
| Procedure identifier | EC-JRC/KRU/2026/OP/6575 |
| TED reference | 226/2026, 807925-2026 |
| Procurement type | Supply contract |
| Procedure | Accelerated open procedure |
| Estimated total value | €650,000 |
| Maximum contract duration | 36 months |
| Award method | Lowest price |
| Framework agreement | No framework agreement indicated |
| Main CPV | 38000000, Laboratory, optical and precision equipment excluding glasses |
| Additional classifications shown | 35113200 and 42000000 |
| Submission method | Electronic submission through the EU Funding and Tenders Portal |
| Lot structure | One procurement lot is identified |
| Publication date | 20 November 2026 |
| Tender deadline | 4 December 2026 at 12:00 Europe/Berlin |
| Public opening | 4 December 2026 at 14:00 Europe/Berlin |
| Latest stated question deadline | 30 November 2026 at 23:59 Europe/Berlin |
Purpose and Scope
The JRC Karlsruhe requires a connected chain of inert gloveboxes operating under under-pressure. The equipment is intended for the handling of radionuclides available at the JRC Karlsruhe, including work associated with actinide-containing organometallic compounds. The requirement combines laboratory equipment supply with an installation that must be integrated into a nuclear research environment.
The technical requirement is not limited to delivery of standalone laboratory cabinets. The successful contractor is expected to provide equipment capable of maintaining the required atmospheric conditions and to deliver an installation compatible with the JRC Karlsruhe facility, its safety arrangements, its ventilation or exhaust interfaces and applicable German nuclear-installation requirements. The precise configuration, performance parameters, interfaces, acceptance tests and site obligations must be taken from the tender technical specifications.
A separate, differently numbered JRC Karlsruhe glovebox procurement contains indicative technical features such as multiple connected gloveboxes, inert gas operation, under-pressure control, filtered and purified gas circulation, transfer antechambers, connection to the site exhaust system, installation, commissioning and a minimum warranty period. Those details are not confirmed as binding for this tender and should be checked against the current technical specifications before being used in a bid 2.
Who Can Apply
The open procedure is generally accessible to eligible economic operators capable of fulfilling the procurement documents. Potential bidders may include specialist glovebox manufacturers, nuclear laboratory equipment suppliers, engineering and systems-integration companies, and consortia combining equipment manufacture, nuclear compliance, installation and commissioning capabilities.
A bidder may participate as a sole tenderer or, where permitted by the administrative specifications, as a group or consortium. Subcontracting may be possible, but the tenderer remains responsible for demonstrating compliance with the requirements and for delivery of the complete contractual scope.
The available portal record does not state a specific company-size restriction or identify the contract as SME-suitable. The record indicates that the procurement is not marked as suitable for SMEs. This does not necessarily prohibit SME participation, but smaller firms should assess whether they can independently meet the technical, financial, regulatory, insurance, staffing and installation requirements or should participate with suitable partners.
The available information does not establish a special nationality limitation. Participation remains subject to the applicable EU procurement rules, exclusion grounds, selection criteria, tender documents, sanctions and any security or regulatory restrictions relevant to work involving radioactive materials and a German nuclear installation.
Applicant Eligibility and Compliance Expectations
Applicants should expect to demonstrate the following, subject to the definitive administrative and technical specifications:
- Legal capacity and authority to submit and sign the tender
- Absence of applicable exclusion grounds, supported by the required declaration on honour
- Economic and financial capacity required by the administrative specifications
- Technical and professional capacity to supply, install, test and commission the required glovebox chain
- Relevant references for high-purity inert-atmosphere systems, radioactive-material laboratories, nuclear installations or comparable controlled environments
- Ability to comply with German laws, regulatory requirements and technical instructions applicable to nuclear installations
- Availability of appropriately qualified personnel for design, manufacture, installation, commissioning and after-sales support
- Ability to coordinate site work with JRC Karlsruhe access, safety, radiation-protection and operational procedures
- Capacity to provide all required technical files, conformity evidence, operating documentation, maintenance information, training and acceptance documentation
- Ability to use the electronic submission system and provide a valid Participant Identification Code for the tendering organisation or organisations
Funding and Commercial Structure
This opportunity does not provide co-financing for an applicant project. It is a procurement contract under which the selected contractor is paid for supplying and implementing the required equipment and services. Applicants should therefore price the full contractual scope rather than calculate a grant reimbursement rate.
| Commercial element | Available information |
|---|---|
| Estimated contract value | €650,000 |
| Funding rate | Not applicable because this is a procurement contract |
| Applicant contribution | No grant contribution structure is stated. Tenderers must bear their bid preparation and delivery costs and price the required performance in the financial offer |
| Price basis | To be completed using the official financial offer form |
| Award basis | Lowest price, provided the tender is admissible and technically and administratively compliant |
| Payment arrangements | The record indicates electronic ordering and electronic payment usage. Detailed payment milestones must be checked in the draft contract |
| Contract duration | Maximum 36 months |
| Renewal | No renewal period is clearly specified in the available record |
| Currency | € |
| Price risk | Tenderers should review the draft contract for price validity, taxes, delivery, installation, acceptance, warranty, liability and variation provisions |
Tender Documents
Six procurement documents are listed, all published in English on 20 November 2026. They form the core source for preparing a compliant offer.
- 101 Inert Glovebox Chain ITT, the invitation to tender
- 202 Inert Glovebox Chain Administrative Annex, containing administrative and procedural requirements
- 303 Inert Glovebox Chain Declaration on Honour, to be completed as required
- 404 Inert Glovebox Chain Technical Specifications, defining the equipment, performance and implementation requirements
- 505 Inert Glovebox Chain Contract, setting out the proposed contractual conditions
- 6Supply of an inert glovebox chain Financial Offer, containing the required pricing structure
The documents are identified as version 1 and no translations are indicated. Applicants should verify the portal immediately before submission for amendments, replacement versions, additional clarifications or changes to the closing time.
Technical Requirements Applicants Should Examine
The technical specifications should be reviewed line by line because the lowest-price award method does not reduce the importance of technical compliance. A low-priced offer that fails a mandatory requirement may be rejected rather than scored competitively.
- Number, layout and interconnection of gloveboxes and transfer chambers
- Inert gas type, purity, circulation, purification, filtration and monitoring requirements
- Required under-pressure range, stability, alarms, controls and connection to the JRC exhaust system
- Leak tightness, containment, radiological protection and contamination-control arrangements
- Compatibility with actinides, alpha-emitting radionuclides and the intended organometallic synthesis processes
- Materials of construction, welding, surface finish, corrosion resistance and chemical compatibility
- Integration with existing JRC Karlsruhe utilities, ventilation, electrical systems, gases and monitoring systems
- Remote handling, sample transfer, antechamber and material-flow requirements
- Applicable German nuclear-installation rules, permits, standards and technical instructions
- Factory acceptance testing, site acceptance testing, commissioning and performance verification
- Installation planning, site surveys, delivery logistics, lifting, access and coordination with JRC personnel
- Operating manuals, maintenance documentation, spare parts, software, calibration and training
- Warranty, response times, corrective maintenance and availability of technical support
- Decommissioning, waste handling and packaging obligations if relevant to installation or replacement activities
Procedure and Submission Requirements
Tenders must be submitted exclusively by electronic means through the submission address associated with the opportunity. An EU Login account is required for electronic submission, for submitting questions and for managing the tender process. Organisations should create or verify their EU Login credentials well before the deadline.
A Participant Identification Code is required for an organisation submitting as a sole tenderer or participating in a consortium. Organisations should check whether an existing PIC is already registered before creating a new registration and should ensure that the legal entity information is accurate and consistent with the tender documents.
The submission should be started early enough to allow completion of organisation registration, role assignment, document conversion, upload, electronic validation and final submission. A draft submission is not equivalent to a submitted tender. The tenderer should retain the electronic submission receipt and verify that the status confirms successful submission before the deadline.
The available portal information states that the contracting authority is not bound to reply to questions submitted after 30 November 2026 at 23:59 Europe/Berlin. Questions should therefore be submitted substantially earlier to allow time for clarification and incorporation of any answer into the tender.
Key Dates and Timing
| Milestone | Date and time |
|---|---|
| Publication | 20 November 2026 |
| Recommended internal clarification cut-off | As early as possible before the official question deadline |
| Latest stated question deadline | 30 November 2026 at 23:59 Europe/Berlin |
| Tender submission deadline | 4 December 2026 at 12:00 Europe/Berlin |
| Public opening | 4 December 2026 at 14:00 Europe/Berlin |
| Maximum contract duration | 36 months from the applicable contractual starting point |
| Tender validity period | The portal data indicates 6 months. Confirm the exact wording in the administrative specifications |
| Portal record inconsistency | The supplied metadata also contains an earlier date of 1 January 2026. The detailed official tender record states 4 December 2026 at 12:00 Europe/Berlin, which should be treated as the operative deadline unless a later corrigendum changes it |
Recommended Bid Preparation Plan
- 1Register or verify the organisation PIC and EU Login access immediately
- 2Download all six current tender documents from the official portal and confirm their version numbers
- 3Map every mandatory administrative, technical and contractual requirement to a bid response or supporting document
- 4Confirm whether the proposed equipment has the necessary nuclear-sector references and German regulatory compliance capability
- 5Identify all site interfaces and obtain input from specialists in ventilation, gas systems, electrical integration, radiation protection and commissioning
- 6Decide whether to bid alone or form a consortium with manufacturers, installers, nuclear engineering firms or specialist subcontractors
- 7Prepare a compliance matrix that distinguishes mandatory requirements from desirable features
- 8Develop a realistic delivery, installation, testing and commissioning programme within the contract duration
- 9Build the price from the official financial offer form and include all design, manufacture, packaging, transport, installation, testing, training, documentation, warranty and support costs
- 10Review the draft contract for payment terms, liability, insurance, intellectual property, confidentiality, security, site access, acceptance, delays, penalties and termination
- 11Submit clarification questions before the stated deadline and monitor the public Q&A for responses
- 12Complete and validate the electronic submission well before 4 December 2026 at 12:00 Europe/Berlin
Main Risks and Issues
- The technical specifications are decisive and are not fully reproduced in the available portal extract. A bid cannot be safely priced or finalised from the opportunity summary alone
- Lowest price applies only among tenders that pass the exclusion, selection, administrative and technical requirements
- The work concerns radionuclides, actinides and a nuclear research facility, creating elevated regulatory, safety, security, insurance and personnel-qualification requirements
- Integration with an existing facility may create site-interface, access, utility, outage and commissioning risks
- The accelerated procedure reduces the time available for clarification, consortium formation, engineering checks and bid approval
- The estimated value is not a guaranteed payment. The final contract amount will depend on the accepted financial offer and the contractual scope
- The portal record contains inconsistent date information in the supplied metadata. The detailed tender record and any subsequent corrigendum must be checked before submission
- The public Q&A extract shows no tender-specific questions at the time captured, so applicants cannot assume that unaddressed technical or contractual uncertainties will be resolved automatically
Overall Assessment
This is a specialised, technically demanding procurement with an estimated value of €650,000 and a single-lot scope centred on a nuclear-research glovebox installation. It is commercially relevant to established suppliers and integrators with credible references in inert-atmosphere equipment, radiological containment and nuclear-site installation.
The lowest-price award method creates strong price pressure, but price should be submitted only after confirming complete technical compliance and the cost of all site, regulatory, commissioning, documentation, warranty and support obligations. The opportunity is unlikely to be suitable for a general laboratory-equipment supplier without nuclear-sector capability or a qualified specialist partner.
The immediate priority is to obtain and analyse the current invitation, administrative annex, declaration on honour, technical specifications, draft contract and financial offer form from the official portal. The official tender documents, rather than the summary metadata or any related JRC procurement, determine eligibility, mandatory specifications, pricing rules, contractual obligations and grounds for rejection 1.
Footnotes
- 1Official opportunity record: EU Funding and Tenders Portal tender page. The available record identifies the tender as EC-JRC/KRU/2026/OP/6575 and TED reference 226/2026, 807925-2026.
- 2A separate JRC Karlsruhe glovebox technical specification located during the analysis describes a related but differently numbered procurement, EC-JRC/KRU/2026/OP/2971. It should not be treated as the binding specification for this opportunity. It indicates the type of technical, installation, pressure-control, nuclear-safety and warranty requirements that may be relevant, but applicants must rely on the documents issued for EC-JRC/KRU/2026/OP/6575.
Update Log
No updates recorded yet.
Discover with AI
Let our intelligent agent help you find the perfect funding opportunities tailored to your needs.
EU Grant Database
Explore European funding opportunities in our comprehensive, up-to-date collection.
Stay Informed
Get notified when grants change, deadlines approach, or new opportunities match your interests.
Track Your Favorites
Follow grants you're interested in and keep them organized in one place. Get updates on changes and deadlines.
Supply and maintenance of one Liquid Scintillation Counter for LMR
The European Commission, Directorate General Joint Research Centre (JRC), has published a public procurement to supply, install, commission, test, train and provide 48 months warranty/maintenance for one low background liquid scintillati...
Durchführung von Strahlenschutzaufgaben in Rückbauprojekten
The Joint Research Centre (European Commission) invites requests to participate in a restricted two-stage procurement to award a single framework agreement for radiation protection services at JRC Karlsruhe with a maximum ceiling of €600...
Maintenance Services for Perkin Elmer Scientific Instruments
The European Commission Joint Research Centre (JRC) in Ispra, Italy has published an open tender (EC-JRC/IPR/2026/OP/5527) for preventive and corrective maintenance, repairs, operational qualification and technical support for Perkin Elm...
Durchführung von Aufbau und Änderung von Elektroinstallationen an Handschuhkästen, heißen Zellen, Labors und im Gebäude im JRC Karlsruhe
The European Commission Joint Research Centre (JRC) Karlsruhe has published a public procurement for a single-supplier services framework agreement to carry out installation, modification and related electrical works on glove boxes, hot...
Maintenance services for Applied Biosystems (Life Technologies) Scientific Instruments
The European Commission Joint Research Centre (JRC) seeks a single contractor under a framework agreement to provide preventive and corrective maintenance, calibration, qualification, repair and technical support for Applied Biosystems /...
Integration of the JT-60SA Actively Cooled Divertor
Fusion for Energy has published a competitive procedure with negotiation (procedure identifier F4E-OPE-1405) for the integration, installation, inspection, testing support and supply of hardware for the JT-60SA actively cooled divertor,...
Quality Control Inspectors for ITER and Broader Approach and Roadmap Projects
Fusion for Energy (F4E) has published an open procurement (procedure F4E OMF 2050) for provision of technical quality control inspection services (CPV 71631000) including resident, itinerant and spot inspectors at contractors and subcont...
On site support activities and supply of Test Coils
Fusion for Energy (F4E) has published tender F4E OMF 2074 for on-site technical support for ITER magnets (preservation, preventive maintenance, cold testing and assembly) and the manufacture and supply of test coils. The procedure is a c...
Ship design and safety assessment of nuclear fission technologies for maritime applications
European Maritime Safety Agency is procuring a 48 month framework contract to deliver technical studies on ship design, reactor integration, coupled multi‑physics simulations and safety assessments for maritime nuclear fission technologi...
mid-throughput next generation genome sequencer
The European Commission Joint Research Centre (DG JRC) has published an open public procurement (procedure EC-JRC/GEE/2026/OP/5609) for the supply, installation, training, 24-month warranty and multi-year maintenance of a mid-throughput...
IT-Sicherheitsberatung für das JRC Karlsruhe
The European Commission Joint Research Centre (JRC) Karlsruhe invites requests to participate in a restricted two-stage procurement (EC-JRC/KRU/2026/RP/2931, TED 699278-2026) for IT security consultancy to revise and support implementati...
Fourniture et installation de vestiaires métalliques
Open EU tender (EP-INLO/LUX/2026/OP/0022) led by the European Parliament for a single-award framework agreement to supply and install metal lockers, shelving and related accessories for Brussels, Luxembourg and Strasbourg. Estimated tota...