Overview
European Commission DG CLIMA is procuring a direct service contract to assess the EU aviation non-CO2 monitoring, reporting and verification (MRV) framework (including NEATS) and to provide analytical support on mitigation policy options. The contract is single-lot, estimated maximum value €320,000, maximum duration 24 months, and will be awarded on the best price-quality ratio with 80% quality and 20% price weighting. Key outputs include an Implementation report assessing 2025–2026 MRV results, a Feasibility/policy options report, a stakeholder consultation and a user-friendly policy-options dashboard, with an indicative kick-off in February 2027. Tenders must be submitted electronically via the Funding and Tenders Portal by 7 December 2026 at 16:00 Brussels time and comply with the exclusion, selection and documentation requirements in the tender specifications.
Partner Search
Find collaboration partners for this call
What You Offer
Describe your expertise here...
You Are Looking For
Describe what you seek here...
Highlights
Tender — EC-CLIMA/2026/OP/0093
One-line summary
Service contract to assess results from the EU non-CO2 monitoring, reporting and verification (MRV) framework for aviation (including NEATS) and to provide analytical support on policy options, potentially to feed an impact assessment and legislative work.
Funding / contract value:Estimated total value approximately €320,000; maximum contract duration 24 months 1.
- 1What it funds: scientific assessment of MRV results (2025–2026 data) and analytical feasibility/impact work on mitigation policy options for non-CO2 aviation effects; deliverables include Implementation and Feasibility reports, stakeholder consultation outputs and a policy-options dashboard.
- 2Who can apply: any economic operator (sole tenderer or joint tender); participants must be registered in the EU Participant Register (PIC) and submit electronically via the Funding & Tenders Portal; subcontracting permitted subject to rules in the tender specifications.
- 3How awarded and practicals: open procedure, award by best price-quality ratio (quality 80% / price 20%); submission deadline on 07/12/2026 (16:00 Brussels time); virtual public opening on 08/12/2026 at 11:00.
| Contracting authority | European Commission, DG CLIMA - Climate Action |
|---|---|
| Estimated total value | €320,000 |
| Deadline for tenders | 07/12/2026 16:00 (Europe/Brussels) |
| Max duration | 24 months |
| Procedure | Open eSubmission (Funding & Tenders Portal) |
| Award method | Best price-quality ratio (quality 80%, price 20%) |
Tender documents (invitation, tender specifications, draft contract, annexes) and electronic submission are on the Funding & Tenders Portal: Opportunity details.
Footnotes
- 1See tender specifications for detailed deliverables, payment schedule (one interim payment linked to Task 1) and access arrangements to NEATS; all submissions must follow eSubmission rules and the Declaration on Honour requirements.
Find a Consultant to Support You
Breakdown
Reference and procurement summary
Call identifier:EC-CLIMA/2026/OP/0093. TED reference: 216/2026 (772214-2026). Contracting authority: European Commission, DG CLIMA - Climate Action. Procedure type: Open procedure (call for tenders). Submission method: electronic submission via EU Funding & Tenders Portal / eSubmission (EU Login account required). Award method: best price-quality ratio. Main CPV: 90000000 (Sewage, refuse, cleaning and environmental services) with additional classification 79300000. Nature of contract: services (service contract). Estimated total value: €320,000. Maximum contract duration: 24 months.
Deadlines and key dates:Publication / TED publication date: 06/11/2026. Deadline for receipt of tenders (final): 07/12/2026 16:00 Europe/Brussels. Public opening date: 08/12/2026 11:00 Europe/Brussels. Contract maximum duration: 24 months. Dates and times in the procurement documents are local time at the contracting authority. The procurement dossier (Invitation to tender, Tender specifications, draft contract, Annexes including Annex 6 Financial tender form) was published on the Funding & Tenders Portal and is the authoritative source 1.
Contract purpose and scope
Objective:The service contract requests expert scientific and policy analysis to (1) assess the results obtained from applying the EU non-CO2 monitoring, reporting and verification (MRV) framework for aviation (including results generated by NEATS and Commission-approved alternative tools) and compile an Implementation report for EU co-legislators; and (2) provide analytical support of policy options to address aviation non-CO2 effects, including support related to Article 14(5) of the EU ETS Directive, and, if appropriate, support the Commission in preparing a legislative proposal and related consultation activities.
Background detail:The MRV framework and the NEATS tool process aircraft 3D trajectories, weather, aircraft characteristics and fuel properties to compute per-flight non-CO2 impacts expressed as CO2-equivalents (CO2(e)) for 20, 50 and 100 year horizons using an efficacy-corrected GWP metric. The MRV transparency obligations will lead to annual publication of non-CO2 impacts (from 2026 reporting). In line with Article 14(5) of Directive 2003/87/EC (as amended), the Commission must produce a report and, if appropriate, an impact assessment and legislative proposal based on MRV results by 31 December 2027. The contractor’s inputs are intended to feed into the Commission’s Implementation report (Task 1) and Feasibility / policy Options report (Task 2).
Detailed tasks and deliverables (summary)
Task 1:Assessment of MRV results (Implementation report) — scope and key requirements:
- 1Develop a matrix-based assessment methodology to evaluate MRV outputs (including NEATS and any Commission-approved alternative tools) across multiple dimensions and actors.
- 2Assess MRV results per species/effect (contrails, O3, CH4, H2O, NOx, soot, oxidised sulphur species), and identify non-accounted effects (e.g., aerosol-cloud interactions) and their potential impact on results using up-to-date literature.
- 3Assess effectiveness, robustness, efficiency, coherence with EU legislation (including EU ETS), and EU added value of the MRV and NEATS.
- 4Liaise with EUROCONTROL, NEATS Scientific Panel, NEATS users (aircraft operators, competent authorities, verifiers) to obtain access to data and user experience; establish data access arrangements early in the contract.
- 5Organise a half-day in-person stakeholder communication event in Brussels to present Draft Implementation report and capture stakeholder input for finalisation.
Task 1 deliverables (indicative timeline relative to kick-off month N):draft Inception report (N+1); intermediary assessment based on 2025 data (N+4); Draft Implementation report (N+8); stakeholder event and follow-up; Final Implementation report (N+11).
Task 2:Analytical support on policy options (Feasibility report) — scope and key requirements:
- 1Design and run a targeted stakeholder consultation (4 weeks), including questionnaire drafting and analysis of submissions; produce a summary report (max 8 pages) within 4 weeks after consultation close.
- 2Develop problem definition, intervention logic, baseline and identify technically feasible and proportionate mitigation options (including contrail avoidance, NOx-related measures and other options in the scope of Article 14(5)).
- 3Assess economic, social and environmental impacts (qualitative and quantitative where possible) of policy options including: impacts on airlines, air navigation services, SMEs, connectivity (islands and remote territories), safety, administrative burden, competitiveness, distributional impacts (traveller types and vulnerable households), hub leakage risks, and co-benefits for air quality and biodiversity.
- 4Apply Better Regulation toolbox methodology (Tool 11 and related guidance) and provide an options comparison, ranking, and preferred package with monitoring & evaluation proposals.
- 5Design a user-friendly policy-options dashboard allowing Commission staff to vary key parameters and view visual outputs.
- 6Provide ad hoc legislative support if the Commission decides to proceed (presentations, call-for-evidence drafting, additional analyses).
Task 2 deliverables (indicative timeline):draft questionnaire (N+5); final Inception report incl. final questionnaire (N+7); draft Feasibility report (N+10); draft Feasibility update incorporating 2027 data and Task 1 findings (N+16); final Feasibility report and policy-options dashboard (N+17); final combined report (N+19). Additional ad-hoc support up to N+24.
Budget, payments and contract model
Estimated / maximum contract value:€320,000 (estimated overall contract amount). Contract type: direct service contract (service contract). Duration: up to 24 months. Payment structure: interim payment(s) and balance. Contract specifications link one interim payment to completion of Task 1 (interim payment of 40% of the contract maximum amount is foreseen in the tender specifications). Final balance paid after submission and approval of final deliverables and list of pre-existing rights (or declaration of none). Currency for invoicing: euro. VAT: the Commission is VAT-exempt; invoicing and VAT instructions provided in the draft contract and Invitation to tender.
Award criteria and evaluation method:Award = best price-quality ratio. Weighting: Quality 80% (methodology 60 pts, work organisation/resources 30 pts, quality control 10 pts; minimum thresholds apply per sub-criterion and an overall technical minimum of 60/100), Price 20%. Scoring formula: Final score(i) = 0.8 * Q(i)/100 + 0.2 * P(l)/P(i) where P(l) is lowest price among qualified bids.
Eligibility, selection and exclusion
Eligible applicants:Any natural or legal person within the scope of the EU Treaties, international organisations and economic operators from third countries with procurement access under agreements (for example : Agreement on Government Procurement (GPA) parties). Registration in the Participant Register (PIC) and EU Login are required to submit a tender. Tenderers may be sole entities or consortia (joint tenders). Subcontracting is allowed; identified subcontractors (those contributing >20% or relied on for selection criteria) must be listed in Annex 4 and provide commitment letters (Annex 5.1). Entities on whose capacities the tenderer relies (not subcontractors) must supply commitment letters (Annex 5.2) and evidence where applicable.
Exclusion grounds:standard Financial Regulation exclusion grounds apply (bankruptcy, fraud, corruption, money laundering, terrorist offences, serious professional misconduct, irregularities, non-payment of taxes or social security, creation of shell entities to avoid obligations, breaches in contract performance financed by the Union, etc.). Positive declaration on Honour (Annex 2) is required; supporting evidence requested at award stage or upon request. Tenderers and involved entities must not be subject to EU restrictive measures (sanctions) that would prohibit performance.
Minimum selection criteria (technical and financial)
- 1Economic/financial: Average annual turnover for the last two financial years above €400,000 (consolidated assessment across involved entities permitted). Evidence: profit & loss accounts or bank statements.
- 2Technical/professional: at least one similar project completed in the last five years with minimum value €70,000 covering at least two of the listed expertise fields (carbon pricing, policymaking for decarbonisation/air quality, aviation operations/emissions/economics, EU impact assessment experience, EU ETS MRV, atmospheric physics/climatology/meteorology, contrail/NOx modelling, AI/data analytics for non-CO2 modelling).
- 3Team composition (minimum profiles): Project Manager (min 4 years project management and experience on projects ~€100K, team leadership), at least one EU ETS aviation/MRV expert (5 years), at least one atmospheric/climatology expert (3 years), at least one aviation operations/economics/fuels expert, at least one AI/machine-learning and advanced analytics expert, at least one EU impact assessment expert; language quality check: at least two team members with native or equivalent English skills. CVs required in the tender.
Who can apply and how (practicalities)
Applicant types:startups, SMEs, large enterprises, universities, research institutes, consultancies, non-profits, NGOs, expert networks, and public bodies may apply provided they meet the legal and selection requirements. Consortia are allowed; joint tenders must appoint a group leader and sign the Agreement/Power of Attorney (Annex 3). Subcontractors and entities whose capacities are relied upon must be declared and provide commitment letters. A Participant Identification Code (PIC) is mandatory.
Submission method and format:Tenders must be submitted electronically via the F&T Portal eSubmission. Tenderers must follow eSubmission system requirements (supported browsers, file types, max attachment sizes, naming conventions). All required documents listed in Annex 1 to the tender specifications must be uploaded into eSubmission; failure to upload mandatory documents will lead to rejection. The technical tender should contain the methodology, team CVs, project management and quality control approach; the financial tender must use the provided Annex 6 Financial tender form and present the full price in euros, VAT excluded.
Documents published with the procurement:Invitation to tender (EN), Tender specifications (EN), Draft Direct Service Contract (EN), Annex 2 Declaration on Honour template (EN), Annex 6 Financial tender form (EN). Contractors will also be granted access to NEATS user resources (EUROCONTROL NEATS User Group SharePoint) subject to arrangements to be agreed during contract implementation.
Templates and application structure (guidance for bidders)
Key templates and forms to include in the eSubmission tender (see Annex 1 of the tender specifications for upload locations):
- 1Declaration on Honour on exclusion and selection criteria (Annex 2) — signed and uploaded for all involved entities per Annex 1 requirements.
- 2Agreement/Power of Attorney for joint tenders (Annex 3) — signed by all group members when tendering as a consortium.
- 3List of identified subcontractors and proportion of subcontracting (Annex 4), and commitment letters from identified subcontractors (Annex 5.1).
- 4Commitment letters from entities on whose capacities the tenderer relies (Annex 5.2) where applicable.
- 5Financial tender form (Annex 6) — complete breakdown of costs, staff days, travel, overheads, and subcontracts; priced in euro and exclusive of VAT.
- 6Technical offer: methodology (including the proposed matrix approach for Task 1), work plan and Gantt, team CVs and roles (matching T2 profiles), description of previous projects meeting T1, quality control procedures, data access plans and liaison approach with EUROCONTROL and NEATS users, and plan for the policy-options dashboard.
- 7Evidence of legal existence and economic/financial capacity (balance sheets / profit & loss for last two years) as required for criterion F1.
Recommended structure for the technical offer (suggested order):1) Executive summary and understanding of objectives; 2) Methodology and matrix approach (Task 1) and policy analysis approach (Task 2); 3) Detailed workplan, milestones and deliverables (link deliverables to the Gantt and payment schedule); 4) Team, roles and CVs; 5) Track record and references (projects meeting T1); 6) Quality assurance and risk mitigation (including conflict of interest management and data access); 7) Data management and personal data protection plan (comply with Article I.7.2 / II.9.2); 8) Communication and stakeholder engagement plan (including the Brussels stakeholder event); 9) Annexes (letters of commitment, supporting evidence, Annex 6 financial breakdown referenced only in the financial offer upload).
Annex 6 financial template structure (guidance):Annex 6 (Financial tender form) requires: itemised personnel costs (position, daily rate or number of working days, allocation of tasks, % of contract), sub-contractor costs, travel and other direct costs, overheads and total price. The form is to be completed and signed by the tenderer or the lead tenderer in case of joint bids.
Geographic and legal eligibility
Beneficiary scope / geographic eligibility:Participation is open to entities from: EU Member States and all natural and legal persons falling within the scope of the EU Treaties; third country entities where an international agreement gives access to EU public procurement (e.g., WTO GPA parties). The tender documentation clarifies access rules and any national requirements. Tenderers must indicate their country of establishment and provide supporting evidence as requested.
Who should apply — ideal applicant profile
The opportunity is targeted at consortia or single contractors with combined scientific and policy expertise in atmospheric/climate science, aviation operations and economics, MRV systems and modelling (contrails/NOx), EU impact assessment experience and advanced data analytics/AI capability. Suitable applicants include research institutes, consultancies with climatology and aviation desks, university teams combined with data science partners, specialised NGOs with technical capacity, and established expert consortia. Experience liaising with EUROCONTROL, ICAO/EASA and implementing EU policy study work is an advantage.
Project stage and expected maturity
Expected project maturity / stage:assessment, validation and policy analysis. The contractor will process and evaluate operational MRV outputs (2025 and 2026 reporting data), validate NEATS/alternative tool results against literature and observation datasets where feasible, and provide impact assessment and policy option analysis suitable to inform Commission decision-making. No technology development is requested; rather scientific analysis, modelling interpretation, policy impact assessment and stakeholder consultation.
Eligibility checklist (practical)
- 1Register organisation in the Participant Register and obtain PIC. Maintain up-to-date SME status if applicable.
- 2Prepare Annex 2 Declaration on Honour and ensure all involved entities sign it as required.
- 3Prepare technical offer structured as above and include CVs and project references demonstrating T1 and T2 requirements.
- 4Prepare financial tender using Annex 6 template; ensure total price ≤ €320,000 and include breakdown of staff days, subcontracting and travel.
- 5List identified subcontractors (Annex 4) if any subcontractor share >20% or relied upon for selection criteria and attach Annex 5.1 commitment letters.
- 6If relying on other entities’ capacities (not subcontractors) include Annex 5.2 commitment letters and supporting evidence.
- 7Ensure compliance with data protection rules (Article I.7.2/II.9.2) and plan to host data within EU/EEA data centres unless Commission agrees otherwise.
Consortium requirement and subcontracting
Consortium:a consortium is not mandatory; submissions by single tenderers or groups are both allowed. If applying as a consortium, appoint a group leader, provide Annex 3 Agreement/Power of Attorney signed by all members, and clarify joint & several liability. Subcontracting is permitted; identified subcontractors (see above) must be declared. The contractor retains full liability for subcontracted works.
Other administrative and practical notes
Language:procurement documents are published in English; tenders may be submitted in any official EU language but all deliverables must be submitted in English. eSubmission system specifics: attachments up to 50 MB per file, max 200 files per submission; eSubmission encrypts attachments on upload; drafts may be edited until the deadline. Questions during submission phase must be submitted via the Portal Q&A; the contracting authority is not bound to reply to questions received later than six working days before the deadline. Contracting authority contact email: CLIMA-B04-ARES@ec.europa.eu.
| Procurement element | Details |
|---|---|
| Estimated value | €320,000 |
| Max duration | 24 months |
| Submission method | eSubmission via Funding & Tenders Portal (EU Login) |
| Award method | Best price-quality ratio |
| Minimum team requirements | Project manager, EU ETS/aviation MRV expert, atmospheric/climatology expert, aviation operations/economics expert, AI/data analytics expert, Impact Assessment expert |
Categorisation answers (structured extraction)
Eligible Applicant Types:Open to natural and legal persons within the scope of the EU Treaties, including startups, SMEs, large enterprises, universities, research institutes, consultancies, non-profits, NGOs and public bodies; consortia / public-private partnerships allowed. Subcontractors and entities on whose capacities the tenderer relies are permitted (subject to declaration and commitment). Entities from third countries with procurement access under international agreements (e.g., GPA) may also participate. See Tender specifications Annex 1 for the exact list of which involved entities must submit which documents.
Funding Type:Procurement / service contract (direct service contract). This is not a grant, loan or equity instrument: it is a public procurement for services commissioned by the European Commission (DG CLIMA).
Consortium Requirement:Consortium not required. The procedure accepts single tenderers and joint tenders (consortia). If a consortium (joint tender) is used, the group leader model applies and the Agreement/Power of Attorney (Annex 3) must be provided. Joint tender members are jointly and severally liable.
Beneficiary Scope (Geographic Eligibility):Entities established in EU Member States are eligible. Participation is also open to natural and legal persons established in third countries where the relevant international agreements allow access to the procurement (for example WTO Government Procurement Agreement parties). In practice, this means EU, EEA and eligible GPA parties; consult the tender specifications and legal basis section for details.
Target Sector:Climate policy and aviation: climate/atmospheric science, aviation operations and emissions, environmental services, policy support and impact assessment, data analytics / AI for modelling, and MRV systems.
Mentioned Countries:No specific countries are singled out as exclusive beneficiaries; the contracting authority is the European Commission (DG CLIMA) based in Brussels, Belgium. Eligibility is governed by the EU Treaties and international procurement agreements. The tender references EU Member States and EU-wide coverage.
Project Stage:Assessment / validation and policy analysis. The work is analytical, reviewing MRV outputs, validating model outputs and developing policy options and impact assessment. Not a technology R&D or commercialization contract.
Funding Amount:Estimated / maximum contract value: €320,000 (entire contract). Contractors must price their offer within this envelope.
Application Type:Open call for tenders (open procedure) with a single-stage electronic submission. Applicants submit full tender (technical and financial) by deadline via eSubmission.
Nature of Support:Monetary (service contract payment). The contractor will receive payment for services delivered under the contract. In addition to monetary remuneration, the contractor will receive access to technical MRV resources (NEATS) and stakeholder engagement opportunities coordinated by the Commission / EUROCONTROL.
Application Stages:Effectively one formal submission stage (single-stage open procedure). Evaluation comprises administrative compliance, exclusion check, selection check, technical evaluation and financial evaluation. There is no second-stage call for proposals; however clarifications and requests for missing evidence may be issued during evaluation.
Success Rates:Not specified in the procurement documents. As a single-contract open tender with an estimated value of €320,000, only one contract will be awarded; success rate depends on number and quality of applicants and cannot be predicted from the published notice.
Co-funding Requirement:No co-funding is required. This is a fee-for-service contract: the Commission pays according to the invoicing and deliverables schedule. Costs must be quoted exclusive of VAT (Commission VAT-exempt).
Templates and application forms (structure overview):Mandatory templates are published in the procurement dossier: Invitation to tender, Tender specifications (with Annex 1 list of required documents), Annex 2 Declaration on Honour (exclusion and selection), Annex 3 Agreement/Power of Attorney (for joint tenders), Annex 4 list of identified subcontractors, Annex 5.1 and 5.2 commitment letters, Annex 6 Financial tender form (price breakdown) and the draft contract. The technical tender should include methodology, workplan, deliverables/Gantt, team CVs, previous project list and quality assurance measures. The financial tender must use Annex 6 and provide staff-day breakdown, subcontractor costs, travel and overheads.
Risks, constraints and special considerations
Key risk areas bidders should plan for:timely access to NEATS and alternative tool outputs (arrange data access with EUROCONTROL and the Commission early), data confidentiality and personal data processing requirements (contract requires data to be processed within EU/EEA unless authorised), potential professional conflicting interests (experts who contributed to the MRV/NEATS development may face eligibility issues), and the need to communicate Task 1 and Task 2 findings separately during stakeholder events (the tender specification explicitly requires separation of assessment and mitigation analysis in public communications). The contractor must comply with Commission security and confidentiality requirements and be prepared to accept checks and audits up to five years after the payment of the balance.
How the Commission expects the work to be organised
Work organisation:The tender must show an explicit allocation of responsibilities (who leads Task 1 and Task 2, subcontractor roles if any) and a realistic resource plan and Gantt. The contractor is expected to liaise with EUROCONTROL and NEATS Scientific Panel (arrangements coordinated via the Commission), organise an in-person stakeholder event in Brussels (half day) to feed into the final Implementation report, implement the targeted stakeholder consultation for Task 2, and deliver both high-level and technical annexes aligned with Better Regulation toolbox standards. A policy-options dashboard is required for the Commission to manipulate parameters independently; the contractor must propose a user-friendly design and deliver both the interface and documentation.
Concluding summary: What this opportunity is about and why it matters
This is a single direct service contract awarded by the European Commission (DG CLIMA) to obtain scientific and policy analysis support on the newly established aviation non-CO2 MRV framework. The contractor will evaluate actual MRV outputs (NEATS and Commission-approved alternatives) for the early reporting years (2025 and 2026), test robustness and coherence, gather user experience, and prepare an Implementation report for EU co-legislators. Separate but related analytical work will assess the feasibility, impacts and trade-offs of policy options to mitigate non-CO2 aviation effects and prepare a Feasibility / impact assessment report and a policy-options dashboard to inform any legislative proposal. The work is time-sensitive and policy-relevant: it feeds directly into a Commission obligation to report and potentially propose legislation by 31 December 2027. The procurement requires a multidisciplinary team bridging atmospheric science, aviation operations and economics, EU impact assessment practice, MRV systems knowledge, and advanced data analytics. Deliverables must follow the Better Regulation toolbox structure, be supplied in English, and be accompanied by accessible publishable versions supportive of public communication. The total estimated budget is €320,000 and the contract term is up to 24 months; interested suppliers must submit a single-stage electronic tender via the Funding & Tenders Portal, using the provided templates and annexes, and meet the technical, financial and exclusion / selection requirements laid out in the tender specifications.
Primary sources:European Commission Funding & Tenders Portal tender dossier EC-CLIMA/2026/OP/0093 (Invitation to tender, Tender specifications, Draft contract, Annexes 2 and 6). For access and downloads use the Funding & Tenders Portal opportunities page for the procedure reference above F&T Portal tender page 1.
Footnotes
- 1All factual procurement details, timelines, required annexes and templates are taken from the official Funding & Tenders Portal tender dossier for EC-CLIMA/2026/OP/0093 (Support for the assessment of the aviation non-CO2 MRV framework). Access the procurement documents (Invitation to tender, Tender specifications, Draft contract, Annex 2 Declaration on Honour, Annex 6 Financial tender form and others) on the Portal link provided above.
Short Summary
Impact Provide the evidence base (Implementation and Feasibility reports plus a policy-options dashboard) to inform the Commission's report under the EU ETS Directive and to assess/enable potential EU policy or legislative measures to mitigate aviation non-CO2 climate effects. | Impact | Provide the evidence base (Implementation and Feasibility reports plus a policy-options dashboard) to inform the Commission's report under the EU ETS Directive and to assess/enable potential EU policy or legislative measures to mitigate aviation non-CO2 climate effects. |
Applicant A multidisciplinary team able to combine atmospheric/climate science (contrails, NOx, aerosols), aviation operations and trajectory data expertise, MRV systems knowledge (NEATS), economic and regulatory impact assessment, stakeholder consultation, and data science/dashboard development. | Applicant | A multidisciplinary team able to combine atmospheric/climate science (contrails, NOx, aerosols), aviation operations and trajectory data expertise, MRV systems knowledge (NEATS), economic and regulatory impact assessment, stakeholder consultation, and data science/dashboard development. |
Developments Assessment and validation of 2025–2026 MRV outputs (NEATS and approved alternatives) against literature and observations, identification of non-accounted effects, and quantitative/qualitative analysis and modelling of technically feasible mitigation options and their socio‑economic and environmental impacts, delivered with an interactive policy-options dashboard. | Developments | Assessment and validation of 2025–2026 MRV outputs (NEATS and approved alternatives) against literature and observations, identification of non-accounted effects, and quantitative/qualitative analysis and modelling of technically feasible mitigation options and their socio‑economic and environmental impacts, delivered with an interactive policy-options dashboard. |
Applicant Type Researchers, consultancies or large corporations and NGOs/non-profits with the required multidisciplinary technical and policy capabilities. | Applicant Type | Researchers, consultancies or large corporations and NGOs/non-profits with the required multidisciplinary technical and policy capabilities. |
Consortium Consortiums are allowed but not required—applications may be single tenderers or joint tenders (subcontracting permitted) with a lead entity responsible for delivery. | Consortium | Consortiums are allowed but not required—applications may be single tenderers or joint tenders (subcontracting permitted) with a lead entity responsible for delivery. |
Funding Amount Maximum contract value €320,000. | Funding Amount | Maximum contract value €320,000. |
Countries Open to entities established in EU Member States; participation by third‑country entities is permitted only where international agreements (e.g., the WTO GPA) grant procurement access. | Countries | Open to entities established in EU Member States; participation by third‑country entities is permitted only where international agreements (e.g., the WTO GPA) grant procurement access. |
Industry EU climate policy / aviation sector — specifically the EU ETS MRV framework and mitigation of aviation non‑CO2 effects. | Industry | EU climate policy / aviation sector — specifically the EU ETS MRV framework and mitigation of aviation non‑CO2 effects. |
Additional Web Data
Opportunity overview
This is a European Commission procurement opportunity for scientific, technical and policy analysis supporting the assessment of the European Union monitoring, reporting and verification framework for aviation non CO2 climate effects. It is a service contract rather than a grant, so successful tenderers will be paid for delivering specified services and outputs rather than receiving grant funding for an independent project. 1
The work will support the Commission in preparing an implementation report for the European Parliament and Council and in assessing policy options to mitigate aviation non CO2 effects. It may also support preparation of a legislative proposal if the Commission considers further legislation appropriate under Article 14(5) of the EU ETS Directive. 2
The contracting authority is the European Commission, Directorate General for Climate Action. The procedure is an open procedure for a direct service contract and is not divided into lots.
Key procurement facts
The principal procurement details are as follows. 1
| Field | Details |
|---|---|
| Opportunity title | Support for the assessment of the aviation non CO2 MRV framework |
| Procedure reference | EC CLIMA/2026/OP/0093 |
| TED reference | 216/2026 and 772214-2026 |
| Contracting authority | European Commission, DG CLIMA, Climate Action |
| Contract type | Services |
| Procedure | Open procedure |
| Estimated maximum contract value | €320,000 |
| Maximum contract duration | 24 months |
| Award method | Best price quality ratio |
| Quality and price weighting | 80 percent quality and 20 percent price |
| Framework agreement | No, direct service contract |
| Number of lots | One lot |
| Main CPV | 90000000, environmental services |
| Additional CPV | 79300000, market and economic research, polling and statistics |
| Place of performance | Contractor premises, with an in person communication event in Brussels |
| Tender language | Any official language of the European Union |
| Deliverable language | English |
| Tender validity period | Nine months |
| Tender submission method | Electronic submission through the Funding and Tenders Portal |
Purpose and policy context
Aviation non CO2 effects include the climate effects associated with nitrogen oxides, soot particles, oxidised sulphur species and water vapour, including contrails. These emissions and atmospheric processes can generate effects through ozone, methane, water vapour and contrail cirrus formation, in addition to the direct climate effect of carbon dioxide.
The contract is linked to the EU aviation emissions trading framework. From 1 January 2025, aircraft operators are required to monitor and report aviation non CO2 effects for each aircraft and calendar year. The Commission has made the Non CO2 Aviation Effects Tracking System, known as NEATS, available to facilitate and automate monitoring, reporting and verification where possible. 2
The Commission must use the results of applying the non CO2 MRV framework to prepare a report by 31 December 2027 and, where appropriate following an impact assessment, a legislative proposal to mitigate aviation non CO2 effects. The procurement is intended to provide the evidence base for that process.
Scope of work
The contract has two substantive objectives. The first is an assessment of the results produced by the non CO2 MRV framework. The second is analytical support for policy options that could further address aviation non CO2 effects.
Task 1: Assessment of the MRV framework
The contractor must assess the available 2025 and 2026 non CO2 results, including results calculated or recalculated by the latest available version of NEATS and, where relevant, Commission approved alternative tools. The assessment must cover the relevant non CO2 species and effects calculated under the framework and describe effects not currently included, such as aerosol effects and aerosol cloud interactions, including their potential relevance based on current scientific literature. 2
The tender must propose an initial matrix based methodology. The assessment is expected to consider the following criteria:
- Effectiveness of the MRV framework and NEATS in producing the intended results
- Robustness, reliability and scientific soundness of the results, including comparison with relevant scientific literature and available observational datasets
- Efficiency, practicality, usability and administrative burden for operators, authorities and verifiers
- Coherence with the EU ETS framework and other relevant EU legislation
- EU added value of the framework and its results
The contractor will need to coordinate with the Commission, EUROCONTROL, the NEATS Scientific Panel, aircraft operators, Member State competent authorities, verifiers and other relevant stakeholders. Access to NEATS and associated data will be arranged at the beginning of the contract with the Commission and EUROCONTROL.
Task 2: Policy analysis and mitigation options
Task 2 covers stakeholder consultation, evidence based analysis of mitigation options and possible ad hoc support if the Commission decides that a legislative proposal should be developed.
The analysis must follow the European Commission Better Regulation approach and address the policy problem, rationale for EU action, objectives, possible options, impacts, comparison of options, preferred options and monitoring arrangements.
The analysis must consider technical feasibility, effectiveness, efficiency, coherence and the interactions between non CO2 effects and carbon dioxide. Specific attention is required for regional and seasonal contrail mitigation, operational constraints, possible route changes, nitrogen oxide trade offs, uncertainty in per flight results and the wider reliability of available scientific evidence.
Economic, social and environmental impacts must be assessed qualitatively and, where possible, quantitatively and monetarily. The analysis is expected to consider aviation operators, the full aviation value chain, small and medium sized enterprises, air navigation service providers, passengers, vulnerable households, Member States, third countries, islands and remote territories, airports, public administrations and verifiers.
Relevant impact areas include air travel costs, EU ETS compliance costs, connectivity, aviation safety, competitiveness, administrative burdens, leakage risks, air quality, ecosystems, biodiversity, employment, international trade, internal market effects, distributional impacts and the possible use of revenues generated by policy options.
Indicative Task 2 allocation
The tender specifications indicate the following initial allocation within Task 2. The percentages are indicative and should be reflected in the proposed resources and methodology.
| Subtask | Indicative share of Task 2 | Main content |
|---|---|---|
| Subtask 2.1 | 10 percent | Stakeholder consultation strategy, questionnaire, collection of written or oral feedback and analysis of responses |
| Subtask 2.2 | 80 percent | Analytical assessment of mitigation options, impacts, modelling, comparison and recommendations |
| Subtask 2.3 | 10 percent | Ad hoc support, including presentations, call for evidence support and additional analysis related to a possible legislative proposal |
Expected deliverables and timetable
The procurement documents provide an indicative timetable based on a planned kick off in February 2027. The exact dates will depend on contract signature and the actual kick off date. The contract may run for up to 24 months. 2
| Deliverable or milestone | Indicative timing from kick off |
|---|---|
| Online kick off meeting | Month N |
| Draft Inception report for Task 1 | Month N plus 1 |
| Intermediary assessment based on 2025 data | Month N plus 4 |
| Draft questionnaire for stakeholder consultation | Month N plus 5 |
| Final Inception report and final questionnaire | Month N plus 7 |
| Draft Implementation report | Month N plus 8 |
| Summary of stakeholder consultation results | Month N plus 9 |
| Draft Feasibility report | Month N plus 10 |
| Final Implementation report | Month N plus 11 |
| Draft Feasibility report update using 2027 data | Month N plus 16 |
| Final Feasibility report and policy options dashboard | Month N plus 17 |
| Final report covering both objectives | Month N plus 19 |
| Possible additional support | Up to Month N plus 24 |
The final report must combine the Implementation report and Feasibility report, their annexes and an overall executive summary. The final deliverables must be supplied in editable Word format and PDF format. The Commission may publish deliverables or publishable versions of them.
The contractor must also provide a user friendly policy options dashboard that allows the Commission to modify relevant parameters and compare policy options through visual outputs such as graphs. The dashboard should be usable by non data literate users and include the most politically and mathematically sensitive parameters agreed with the Commission.
A half day in person communication event in Brussels must be organised for presentation of the draft Implementation report and collection of stakeholder feedback. The contractor must summarise the feedback and explain how it was considered in the final assessment.
Who can apply
The open procedure allows any interested economic operator that meets the procurement conditions to submit a tender. Applicants may be natural persons, legal persons, groups of economic operators or international organisations, subject to the applicable EU procurement access rules. Entities established in third countries may participate where an applicable EU agreement or the World Trade Organization Government Procurement Agreement provides access. 2
Applicants may participate as a sole tenderer or as a joint tender. Subcontracting is permitted, and a tenderer may rely on the capacity of other entities if it provides the required commitment and supporting evidence. Joint tender members assume joint and several liability for the performance of the contract.
The opportunity is particularly relevant to organisations combining several of the following capabilities:
- Scientific expertise in aviation non CO2 climate effects and atmospheric processes
- Experience with monitoring, reporting and verification systems and aviation emissions data
- Expertise in contrails, nitrogen oxides, soot, sulphur species, ozone, methane, water vapour and climate metrics
- Aviation operations, flight trajectory, meteorological and aircraft performance knowledge
- Policy impact assessment and Better Regulation analysis
- Economic modelling, cost benefit analysis, distributional analysis and administrative burden assessment
- Stakeholder consultation and facilitation involving aviation operators, regulators and technical experts
- Data science, scenario analysis, uncertainty analysis and development of interactive dashboards
- Experience preparing Commission quality technical reports and policy recommendations
The opportunity is marked as not specifically suitable for SMEs in the procurement data. This does not constitute an exclusion of SMEs. An SME may participate alone, as part of a consortium or as a subcontractor if it can satisfy the applicable capacity requirements.
Eligibility and exclusion conditions
Each tenderer and relevant involved entity must complete the declaration on honour covering exclusion and selection criteria. The declaration applies to the sole tenderer, group members, identified subcontractors and entities whose capacities are relied upon where applicable. 4
- No bankruptcy, insolvency, winding up or analogous situation
- Compliance with tax and social security payment obligations
- No grave professional misconduct or serious breach of professional obligations
- No final conviction for fraud, corruption, organised crime, money laundering, terrorist offences, trafficking or other listed criminal offences
- No significant deficiencies in the performance of previous contracts financed by the EU budget
- No established irregularity or creation of entities to circumvent legal obligations
- No conflict of interest that could negatively affect contract performance
- No prior involvement in preparing the procurement documents that created an unremedied distortion of competition
- No established debt to the European Union or related bodies that could be offset against payments
- Tender prepared independently and autonomously from other tenders
Where relevant, the contracting authority may request evidence such as judicial records, tax certificates, social security certificates, equivalent official documents, evidence of legal existence and evidence of technical, professional and financial capacity. Applicants should prepare this evidence before submission because the contracting authority may request it within a short deadline.
Selection and professional capacity
The tender specifications identify legal and regulatory capacity, economic and financial capacity and technical and professional capacity as selection areas. The precise thresholds and documentary evidence must be checked in the current tender specifications and their annexes before submission. 2
The proposed team should demonstrate that it can deliver the full scientific, technical, economic and policy scope within the timetable. The tender should clearly allocate responsibilities, identify key experts, explain access to specialist data and tools, and demonstrate experience with comparable assignments.
A strong consortium may be advantageous where one organisation provides aviation and atmospheric science, another provides economic and regulatory impact assessment, and another provides stakeholder engagement, data engineering or dashboard development. Any consortium must appoint a group leader and submit the required agreement or power of attorney.
Tender preparation requirements
Tenders must be submitted exclusively through the electronic submission system in the Funding and Tenders Portal. Submission by email, post or another method will be disregarded. Each organisation involved in the tender must be registered in the Participant Register and have a Participant Identification Code. An EU Login account is required for electronic submission. 3
The tender should not exceed 50 pages, excluding documents that the procurement documents treat separately. Tenderers should follow the required structure and include all forms and declarations requested in the tender specifications.
The submission should include a clear technical methodology, initial matrix approach for Task 1, proposed assessment criteria, work plan, timetable, team structure, allocation of tasks, quality assurance arrangements, data and tool access approach, stakeholder engagement approach, risk management and financial offer.
The financial tender form requires a breakdown by service provider, position, working days, task allocation, proportion of the contract and costs. Travel, overheads, consumables and other related costs must be included where applicable. The total tender price must not exceed the maximum budget of €320,000. 4
Evaluation and award
The contract will be awarded using the best price quality ratio. The available procurement data indicates an 80 percent weighting for quality and a 20 percent weighting for price. The detailed quality subcriteria and minimum requirements must be taken from the tender specifications. 1
Because quality represents most of the evaluation, applicants should not compete solely on price. The tender should demonstrate scientific credibility, a realistic delivery model, robust methodology, strong understanding of NEATS and the EU MRV framework, credible access to relevant experts and data, and a convincing approach to translating evidence into policy options.
Budget, payment and contract conditions
The estimated maximum total value is €320,000. This is the ceiling for the procurement and not a grant amount or guaranteed payment to an applicant. There is no co financing rate, eligible cost percentage or grant funding rate because this is a public procurement contract.
The contract is expected to be a direct service contract with a maximum duration of 24 months. The tender specifications provide for one interim payment linked to completion of Task 1. Further payment conditions, acceptance procedures, deductions and contractual rights are governed by the draft contract and should be reviewed before submission.
Within three years after signature, the Commission may use a negotiated procedure to procure new similar services from the successful contractor up to a maximum of 50 percent of the initial contract value. On the stated maximum value, this could represent up to €160,000 of additional similar services, subject to the applicable legal and contractual conditions. 2
Important deadlines and submission controls
The official notice states that tenders must be received by 7 December 2026 at 16:00 Brussels time. The public opening is scheduled for 8 December 2026 at 11:00 Brussels time. The contracting authority is not bound to answer questions submitted after 27 November 2026 at 23:59 Brussels time. 1
The deadline is strict. The electronic submission receipt showing the official date and time of receipt is the evidence of timely submission. Tenderers should upload files well before the deadline, verify accepted formats and file sizes, and retain the submission receipt.
Up to two representatives per tender may attend the virtual public opening if they request access in accordance with the invitation letter. The public opening is limited mainly to verification of submission compliance and announcement of tenderer names.
Key risks and applicant considerations
- The contract requires integration of aviation science, emissions data, climate modelling, economic analysis and EU policy expertise. A narrow academic or consultancy profile may not cover the full scope.
- Access to NEATS, NEATS data and any approved alternative tools must be planned early and coordinated through the Commission and EUROCONTROL.
- The work must distinguish clearly between assessment of the MRV framework under Task 1 and assessment of mitigation measures under Task 2.
- Results may be published by the Commission, so the tenderer should plan for transparent methods, reproducible analysis, appropriate referencing and accessible publication quality documents.
- The analysis must address uncertainty and trade offs between carbon dioxide and non CO2 effects rather than relying on a single climate multiplier.
- The 2027 MRV data is an important input to the updated Feasibility report, creating a dependency between data availability and the delivery timetable.
- The tenderer bears the costs of preparing and submitting the tender and attending the opening session.
- The Commission may cancel the procurement before contract signature without an obligation to compensate tenderers.
- No variants are allowed. Alternative solutions or variants presented in the tender may be disregarded.
- Restrictive measures and procurement access rules apply to tenderers, group members, subcontractors and entities whose capacities are relied upon.
Recommended bid strategy
- 1Build a multidisciplinary core team covering aviation operations, atmospheric chemistry, contrail science, climate metrics, MRV systems, economics, impact assessment, stakeholder consultation and data visualisation.
- 2Present a practical matrix methodology that maps non CO2 species, MRV functions, metrics, actors, data sources and assessment criteria.
- 3Demonstrate direct experience with aviation emissions, flight data, meteorological data, aircraft characteristics, atmospheric modelling or comparable monitoring systems.
- 4Provide a clear plan for accessing and validating NEATS outputs and for comparing results with scientific literature and observational datasets.
- 5Explain how uncertainty, sensitivity analysis, data limitations and trade offs between carbon dioxide and non CO2 effects will be handled.
- 6Show how impacts on passengers, vulnerable households, remote regions, aviation workers, operators, public authorities, SMEs and third countries will be assessed.
- 7Provide a credible stakeholder consultation plan that can be launched shortly after the intermediary assessment is available.
- 8Include a realistic Gantt plan linked to the Commission deliverables and a quality assurance process for reports, models, data and dashboard outputs.
- 9Keep the technical tender within the 50 page limit and ensure every requested form, declaration, commitment letter and financial schedule is complete.
- 10Submit early through the portal after validating the PICs, authorised signatories, attachments and electronic submission receipt.
Overall assessment
This is a specialised, high value knowledge procurement for organisations with established expertise in aviation non CO2 climate impacts and EU climate policy. The opportunity is strategically significant because its outputs are intended to inform the Commission report required under the EU ETS Directive and may directly support future EU regulatory action.
The strongest tenders are likely to combine rigorous scientific assessment of NEATS and the MRV framework with credible economic, social and environmental impact analysis. The 80 percent quality weighting means that methodological strength, relevant team capability, evidence access, delivery realism and policy usefulness are likely to be more important than offering the lowest price.
Applicants should treat the official Funding and Tenders Portal notice, invitation letter, tender specifications, draft contract, declaration on honour and financial tender form as the controlling documents. Any later amendment, clarification or published question and answer should be checked before final submission. 1
Footnotes
- 1Official opportunity notice and current procurement information: Funding and Tenders Portal opportunity
- 2Official tender specifications: Tender specifications
- 3Official invitation letter and electronic submission requirements: Invitation to tender
- 4Official procurement forms: Declaration on honour and Financial tender form
Update Log
No updates recorded yet.
Discover with AI
Let our intelligent agent help you find the perfect funding opportunities tailored to your needs.
EU Grant Database
Explore European funding opportunities in our comprehensive, up-to-date collection.
Stay Informed
Get notified when grants change, deadlines approach, or new opportunities match your interests.
Track Your Favorites
Follow grants you're interested in and keep them organized in one place. Get updates on changes and deadlines.
Framework Contract for Impact Assessment and Evaluation Support Studies in the Field of Transport and Tourism
The European Commission DG MOVE publishes an open tender (EC-MOVE/2026/OP/0006) to establish multiple framework contracts for impact assessments, evaluations and related policy support studies in the field of transport, mobility and tour...
Assessing the Elasticity of Retail Investment to Tax Incentives
The European Commission (DG FISMA) is procuring a 12‑month research and consultancy contract (procedure EC-FISMA/2026/OP/0010) to estimate the elasticity of retail investment to tax incentives and to assess short‑ and long‑term budgetary...
Completion and development of Environmental Footprint Datasets
The European Commission DG Environment (procedure EC-ENV/2026/OP/0041) invites tenders for a service contract to revise and finalise draft Environmental Footprint datasets from the terminated EF 4.0 and to develop new datasets for interm...
Learning through Experimentation for Adaptive Programming (LEAP) - Producing experimental designs for ERDF/CF/JTF investment in the field of energy efficiency measures
The European Commission DG REGIO has published an open procurement (EC-REGIO/2026/OP/0057) seeking a service provider to design implementation-ready experimental approaches for ERDF, Cohesion Fund and Just Transition Fund energy efficien...
EEA/CCE/TC/26/012 - Topic Centre on Energy System Decarbonisation
EEA/CCE/TC/26/012 is a restricted European Environment Agency call for tenders to establish a Topic Centre on Energy System Decarbonisation under a framework service contract with an indicative ceiling of €1,005,000 for 2027–2030. Only o...
Ship design and safety assessment of nuclear fission technologies for maritime applications
European Maritime Safety Agency is procuring a 48 month framework contract to deliver technical studies on ship design, reactor integration, coupled multi‑physics simulations and safety assessments for maritime nuclear fission technologi...
Framework service contract for defence testing and evaluation campaigns and other operational experimentation activities
The European Defence Agency (procedure EDA/2026/RP/0012) is procuring a single framework service contract to deliver defence testing, evaluation and operational experimentation campaigns, primarily supporting BraveTech EU Phase 2. The fr...
Content support to the Forest Information System for Europe (FISE) and forest assessments with respect to support to forest-related EU policies
The European Commission, Directorate-General for Environment has published an open procurement (EC-ENV/2026/OP/0035) for content support to the Forest Information System for Europe (FISE) and policy-relevant forest assessments. The contr...
Feasibility study on introduction of the European Child Guarantee Card
The European Commission (DG EMPL) invites tenders for a feasibility study on the introduction of a European Child Guarantee Card to assess policy, legal, technical and delivery feasibility and to support pilot design. This open-procedure...
Call for expressions of interest
The European Commission, through the Directorate-General for Research and Innovation, has issued a Call for Expression of Interest (CEI) identified as UCA 23/006. This call aims to establish a list of potential tenderers for the procurem...
ECCAIRS.2 - E2 MIDAS - Maintenance, Infrastructure, Development and Application Support
The European Union Aviation Safety Agency (EASA) is procuring contractors to provide continuous maintenance, infrastructure, development, cloud and application support for the ECCAIRS 2 aviation safety occurrence reporting platform under...
Multiannual FWC on monitoring, research and analysis related to VET and qualifications
Cedefop is procuring a multiannual framework contract (CEDEFOP/2026/OP/0005) to provide monitoring, research and analytical services on vocational education and training, qualifications and digital credentials. The open procedure is mana...